Shootist Posted March 3, 2016 Report Share Posted March 3, 2016 I'm thinking about buying a Thompson Contender rifle. One of the reasons is to be able to change barrels of different calibres. The question is, how difficult (i.e. expensive) would it be for a gunsmith to make a barrel to fit if the desired calibre isn't readily available from Thompson? Link to comment Share on other sites More sharing options...
wildrover77 Posted March 5, 2016 Report Share Posted March 5, 2016 I'm thinking about buying a Thompson Contender rifle. One of the reasons is to be able to change barrels of different calibres. The question is, how difficult (i.e. expensive) would it be for a gunsmith to make a barrel to fit if the desired calibre isn't readily available from Thompson? Armalon can do this but the only economic way is to get a barrel in from the states in the calibre you want. There are several suppliers who produce a barrel in nearly any calibre you can think of. There is a chap in Norflok planning to get some in. Link to comment Share on other sites More sharing options...
garyw Posted March 5, 2016 Report Share Posted March 5, 2016 viking arms used to deal with Thompson may be worth a call to them Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.