527vamint Posted May 31, 2015 Report Share Posted May 31, 2015 OK I aquired a rcbs 223 f/l die but the threaded bar for the decaping pin and the expander has a missing locking nut,does anyone know what size it will be,so I can get one straight of the racks at work. Cheers Andy Link to comment Share on other sites More sharing options...
527vamint Posted May 31, 2015 Author Report Share Posted May 31, 2015 Od is 0.185" or 4.74 mm. Link to comment Share on other sites More sharing options...
Vermincinerator Posted June 2, 2015 Report Share Posted June 2, 2015 OK I aquired a rcbs 223 f/l die but the threaded bar for the decaping pin and the expander has a missing locking nut,does anyone know what size it will be,so I can get one straight of the racks at work. Cheers Andy No.10x32 Unified Ian. Link to comment Share on other sites More sharing options...
527vamint Posted June 2, 2015 Author Report Share Posted June 2, 2015 Thanks for that,will order from rcbs as we don't have anything like that at work,the closest I got was 3/16"bsf with a thought of it being 3/16 UNF . Cheers Andy. Link to comment Share on other sites More sharing options...
Vermincinerator Posted June 2, 2015 Report Share Posted June 2, 2015 3/16 BSF might fit its only the angle of thread form that is different, the RCBS stems can be anything up to .010" undersize, all mine are different, might be worth a try Ian. Link to comment Share on other sites More sharing options...
527vamint Posted June 2, 2015 Author Report Share Posted June 2, 2015 I tried a 3/16"bsf nut, it seemed tight. If the threads are a different angle that would explain why. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.