w0rks2much Posted September 9, 2014 Report Share Posted September 9, 2014 Hi folks, I struggling with neck sizing. I've been full length re-sizing (.223, .243 & alot of .308) for around 4 years and it works very well with excellent 600 yard groups from the .308 but i understand that neck sizing is better as it promotes brass life. Does anyone know how to set up the Hornady neck sizing die? It seems to differ to what i understand as a conventional full length die. I'm sure the die is working fine it's just me doing it wrong. Any help please? Thanks. Link to comment Share on other sites More sharing options...
dannywayoflife Posted September 9, 2014 Report Share Posted September 9, 2014 Bin it and buy a lee collet die! Link to comment Share on other sites More sharing options...
gbal Posted September 9, 2014 Report Share Posted September 9, 2014 Don't give up on neck sizing-it's so much less effort and no lub mess,and,as you note so much easier on the brass,including the neck.....just a win-win no brainer,generally. Link to comment Share on other sites More sharing options...
1967spud Posted September 9, 2014 Report Share Posted September 9, 2014 id still reccommend lubeing the nk area though Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.