v-max Posted March 29, 2008 Report Share Posted March 29, 2008 Hello must say a thanks to SAKO as i bought these dies from him with some extras many thanks.My question is the collet die they mention the TOGGLE or SNAP over the centre on some presses what is this? I have a RCBS rockchucker press & found i could only work the collet die just under 1 turn for the neck size as it takes a fair press (min. 25lbs.) as stated in paper work & i think i may need to fix my press better if i wish to use/trail the die. I got the set as i have RCBS dies but liked my lee dies iv worked over the years & though i might play/try the collet die.Any help advice appreciated cheers. Link to comment Share on other sites More sharing options...
Andrew Posted March 29, 2008 Report Share Posted March 29, 2008 If you raise the ram on your press and watch it, it will rise up to it's maximum and then drop a tad if it's the kind that cams over. Remember it doesn't not take a huge amount of crush to hold a bullet firmly.~Andrew Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.