Brillo Posted January 13, 2014 Report Share Posted January 13, 2014 To all the guys who use them, what make of torque wrench would you recommend for something like the bedding screws and what is a typical setting? Thanks Link to comment Share on other sites More sharing options...
Jagged 77 Posted January 13, 2014 Report Share Posted January 13, 2014 I use and would recommend Borka, however availability is limited at the moment but should improve after SHOT. Action screws can vary, if you have a fully bedded stock with aluminium pillars you can go to 65 in lbs, as you can with something like an AICS chassis. If you have an un bedded wood stock without pillars you wouldn't want to go too much beyond 40 at a guess. You can usually find specific information with a bit of Google fu... Use of a torque wrench on scope rails and rings is a real help as these smaller fasteners tend to get over tightened easily. Link to comment Share on other sites More sharing options...
DL. Posted January 13, 2014 Report Share Posted January 13, 2014 I use a weaver torque wrench, torquing to 35"lbs for Tikka action screws. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.