Jump to content

Slowly getting somewhere


ejg223

Recommended Posts

Working on Jamie’s theory of the barrel wanting to run a one speed.

 

I had a lucky guess with my first load of 155 a-max and a mild 42gr H335 in

my 1in10 308 with tight groups. After that I couldn’t get 165gr SST’s nor

165 Nos BT’s to group und an inch with neither H335 40.5 – 41.5gr or

with Varget up to 44.5gr. Even N140 up to 44.5gr wasn’t great.

Big improvement when pushing any 165gr a bit harder with 45gr. Varget or N140.

Factory Lapua 167 scenars also works well in my rifle.

 

Also tried some 150gr SP’s and 150 Nos Bt’s with 45.5gr - 46.5gr Varget or N140,

groups where terrible.

 

Thought I’d try Silents theory of slowing the little 150’s down a bit with 42.5gr H335 and

tried them today , two touching and one a bit off but still just a tad over ½”. Good for that scope.

Got a scope with a fat reticule at the moment.

 

So it seems to work. My rifle seems to want the 165’s driven hard and the 150’s mild to

reach similar speeds. Must try to set up our chrony now.

 

Jamie you could have told me that it actually works :o , would have saved me some time.

 

All loads Saami, that’s also my mag length. Way off the lands.

edi

Link to comment
Share on other sites

i have found that my 308 likes the bullets doing down the pipe alot slower i am getting very promicing results from lap 155gr scenars and vit N150 but with a relativly low charge, 41.2gr off the top of my head, surprising that it aint always the faster the better!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy