baldie Posted February 14, 2013 Report Share Posted February 14, 2013 Just produced two new muzzle brakes in stainless steel. First is a sako trg style brake with a 5/8" x 18 UNF thread and clamp bolt. These go straight on a standard remmy etc with the "factory" thread. They can be bored for any calibre from .22cf upwards and are supplied to gunsmiths as such. Retail sales are bored out to suit requested calibres. These are £95 plus postage. The second brake is available in a wide range of thread sizes, and i have 18mm x 1 and 5/8" x 18 UNF in stock, others on request. Again , these are boreable by your gunsmith, but must be indexed to fit, so not a diy brake. These are £75 plus postage and are in stainless steel finish. This one has been painted black to match the gun it was fitted to yesterday. Trade enquiries on both are most welcome. Link to comment Share on other sites More sharing options...
Swamp Donkey Posted February 14, 2013 Report Share Posted February 14, 2013 Dave, can you do the top one in m14x1 ? In .308 ? Pleeeaaasssseeeee Link to comment Share on other sites More sharing options...
baldie Posted February 15, 2013 Author Report Share Posted February 15, 2013 There,s always one isn't there ? No. Just had 75 made in this one thread as its the most common. Link to comment Share on other sites More sharing options...
tackb Posted February 15, 2013 Report Share Posted February 15, 2013 bet you could hack off the end of his barrel and rethread in 5/8" x 18 UNF though? Link to comment Share on other sites More sharing options...
Wildcat69 Posted February 15, 2013 Report Share Posted February 15, 2013 Really nice muzzle brake, will keep you posted in the future for on a 308 as I am having a re barrel job soon. What diam size is it at the thread side? I am having a light varmint contour from Bartlein which has a .875" muzzle diam. Cheers Link to comment Share on other sites More sharing options...
newsatten Posted February 15, 2013 Report Share Posted February 15, 2013 Hi Dave, whats the total cost if you take one out, to fit a 308? ive a Tikka Super Varmint, have a T8 which is marked 30 - 5/8 - F, which fits a treat . Best Link to comment Share on other sites More sharing options...
baldie Posted February 15, 2013 Author Report Share Posted February 15, 2013 They are £95 bored out to suit, no extra charge. The diameter at the back i,ve forgotten, but its somethink like 22mm. The rem varmint/pss barrels fit perfectly with room to spare, so your bartlien would have no problems. Link to comment Share on other sites More sharing options...
Wildcat69 Posted February 15, 2013 Report Share Posted February 15, 2013 Yes just over 22mm. Brilliant I'll get back to you when it's all done. Thanks Dave Link to comment Share on other sites More sharing options...
newsatten Posted February 15, 2013 Report Share Posted February 15, 2013 Nice one, just ring your work number to order one? you there tomoz, or shall i wait till Monday? best Link to comment Share on other sites More sharing options...
baldie Posted February 15, 2013 Author Report Share Posted February 15, 2013 Monday,s good. Link to comment Share on other sites More sharing options...
newsatten Posted February 15, 2013 Report Share Posted February 15, 2013 Will do Link to comment Share on other sites More sharing options...
Orka Akinse Posted February 15, 2013 Report Share Posted February 15, 2013 pure unadulterated art Dave fantastic its a shame I only shoot with the mod on nowadays Link to comment Share on other sites More sharing options...
newsatten Posted February 18, 2013 Report Share Posted February 18, 2013 Cheque in the post (no really!!) best Link to comment Share on other sites More sharing options...
baldie Posted April 3, 2013 Author Report Share Posted April 3, 2013 Just got stocks in of the small 2 port brake in both 18mm x 1 and 5/8" x 18 unf. Link to comment Share on other sites More sharing options...
Crash72 Posted December 21, 2014 Report Share Posted December 21, 2014 Dave do you have a muzzle brake for my new Tikka T3 Varmint Stainless, threaded 18x1? Thanks, Crash Link to comment Share on other sites More sharing options...
baldie Posted December 21, 2014 Author Report Share Posted December 21, 2014 Yes, I have the pepper pot style and also the two side ported style in 18mm x 1. Link to comment Share on other sites More sharing options...
Crash72 Posted December 21, 2014 Report Share Posted December 21, 2014 Thanks Dave. Will come and see you after the holidays for one. Link to comment Share on other sites More sharing options...
baldie Posted December 21, 2014 Author Report Share Posted December 21, 2014 I,m only taking Christmas and boxing day off, and will be back in on Monday the 29th. Link to comment Share on other sites More sharing options...
Wazzer Posted December 22, 2014 Report Share Posted December 22, 2014 Dave, how much extra would it be to paint the sako type Thanks Link to comment Share on other sites More sharing options...
baldie Posted December 22, 2014 Author Report Share Posted December 22, 2014 Not doing the sako type anymore I'm afraid. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.