Brugger & thomet surpressor repair ?

[Devil_bri]

I have a B&T surpressor with a loose baffle inside

Does anyone know who can fix them ?

I emailed B&T asking if they could do it or if they use anyone for repairs, but I haven't had a reply !!

Thanks

[ChrisF]

If its a steel jobbie , like mine , you need to unscrew the front cap , and there is a lock ring inside the body , that will need to be screwed down tight again , take it to a gunsmith

[Gunsgobang88]

Hi,

 

Have you tried Viking Arms? They are the UK importers,

 

Alan

[Ronin]

Suggest Viking Arms, assuming it came from them originally

 

 

If you get no reply straight away, I know someone there, so let me know

[Devil_bri]

Thanks

I will give Viking arms a shout

I eventually got a reply from B&T who told me to heat the end cap up and it should screw off ! I tried this but can't get the blinking thing to budge !

[Devil_bri]

Anyone know a good gunsmith who could open it and repair it ?

[Gunsgobang88]

Hi,

 

What is your location?

 

Alan

[Devil_bri]

N.Ireland

[Gunsgobang88]

Oh bu...r! If you were local I could help,

 

Alan

[Devil_bri]

B&T customer services are useless !

Fair enough they did tell me how to fix it, but when I asked if I could send it back to them for repair they refused stating they would not be able to send it back to me due to export laws

Surely if its going to my rfd there shouldn't be a problem !!

[Devil_bri]

[Devil_bri]

above is a photo B&T sent me, it is the tool they use to remove the end cap

can anyone tell me what it is called and where i could buy 1 ?

b&t could not tell me what it was called !

[Gunsgobang88]

above is a photo B&T sent me, it is the tool they use to remove the end cap

can anyone tell me what it is called and where i could buy 1 ?

b&t could not tell me what it was called !

Hi,

 

I would call it an adjustable peg spanner,

 

Alan

[Devil_bri]

After adapting an angle grinder wrench, I eventually got the end cap off !!

Now I am really puzzled. B&T told me to tighten the spanning ring to stop any movement. However the ring is as tight as a big tight thing !

The loose baffle is at the other end, so looks like I will have to strip the insides out to get to the loose part !

Anyone got any ideas how to do it ? Once again B&T are of no help with this.

[Tiff]

Have you had any more luck getting it fixed?

 

My B&T has had a slightly loose baffle for a few years aswell....Sporting Services can't fix it in house and sending it back would cost too much.

 

[Devil_bri]

It's in with a local gun smith as we speak !

He's right about costing a fortune to send back to B&T, and B&T won't send it back due to export laws as they are not in the EU !

[Tiff]

Thanks for the speedy reply. I'll drop Alan a line in the morning, since it sounds like he may be able to help.