Picatinny Rail for AICS Stock

[maespant]

Hello All

 

I have a 6mmBR Stiller Action repeater sat in an AICS Stock

 

I have just bought a Pulser N750 for this and would like to put the illuminator on the Stock rather than the Scope

 

I have seen with the Viper Skins you can buy a Picatinny Rail to mount with fixing supplied, Can you get the same sort of thing for a Standard AICS Stock?

 

Have seen the Badger front end kit but the £350+ Seems a bit steep to me!!!

 

Thanks in advance for any help

[brown dog]

Hello All

 

I have a 6mmBR Stiller Action repeater sat in an AICS Stock

 

I have just bought a Pulser N750 for this and would like to put the illuminator on the Stock rather than the Scope

 

I have seen with the Viper Skins you can buy a Picatinny Rail to mount with fixing supplied, Can you get the same sort of thing for a Standard AICS Stock?

 

Have seen the Badger front end kit but the £350+ Seems a bit steep to me!!!

 

Thanks in advance for any help

 

I'd think the viper one will go on a standard stock panel - may need to drill a couple of holes in the panel, but that'd be a 2 minute job.

[Montana]

The viperskins I have here has like brass inserts to take the screws which hold the picatinny on. They are also thicker to accomodate these insets than the OEM AI panels.

 

I dont think you'd have enough strength in the AI panels unless you epoxied something to strengthen the skin on the back side, and used a threaded insert.