Christian Posted June 24, 2012 Report Share Posted June 24, 2012 Hi, I've got a pair of Wilson hand dies for my .300 WM, but the Winchester brass I'm using doesn't fit in the dies (new and used). It's not by a lot, but none the less it doesn't fit. Do any of you have any experience with having dies opened by Wilson, as they advertise in their instruction manuals? Your input is very much appreciated. Regards, Christian Link to comment Share on other sites More sharing options...
Offroad Gary Posted June 25, 2012 Report Share Posted June 25, 2012 i had a 6.5x47 neck die from reloading solutions that wouldnt accept the new lapua brass, Aftab changed it for one of the others he had in stock which was fine. rogue die apparently. Link to comment Share on other sites More sharing options...
Davy Posted June 25, 2012 Report Share Posted June 25, 2012 I had to polish some out for someone a while ago, it was not by a lot but was enough to be a nuisance. Link to comment Share on other sites More sharing options...
Christian Posted June 25, 2012 Author Report Share Posted June 25, 2012 Hi both, Thanks for replying. Will talk to reloading solutions. Alternatively, Davy, could I commission to polish the dies for me? Regards, Christian Link to comment Share on other sites More sharing options...
Davy Posted June 25, 2012 Report Share Posted June 25, 2012 Yes that is not a problem if you are stuck. Link to comment Share on other sites More sharing options...
Christian Posted June 25, 2012 Author Report Share Posted June 25, 2012 Great, thanks, I'll get back to you. Cheers, Christian Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.