v-max Posted May 13, 2012 Report Share Posted May 13, 2012 Hi i have been looking at load data for A-Max (52g) for an up & comming comp. I used them last year & my groups are ok at the 100yrd with them on a 35.5g of varget with cci br primer. I see that my Lee data manuel list's 36g as max yet with 50g bullets it's 37.5g & for 55g it's 36.5g. I know about working up my loads & pressure sign's but just wondered before i try & push them a bit if i have missed some thing. Are the jackets diffrent & cant take it or is it the design of the bullet etc??. Should i just push them & see as my 1-12 twist barrel shot the 50g noslers in .250MOA at 100yrds with 37.1g of varget & cci-br primer. I have got some 55g & 64g bergers to try with the higher BC but just wonderd why the A-Max were down loaded in my eyes. Link to comment Share on other sites More sharing options...
garyw Posted May 14, 2012 Report Share Posted May 14, 2012 what calibre rifle!then maybe we can help you. Link to comment Share on other sites More sharing options...
sauer Posted May 14, 2012 Report Share Posted May 14, 2012 .22-250 that hes on bout in this case guys paul Link to comment Share on other sites More sharing options...
matchking Posted June 3, 2012 Report Share Posted June 3, 2012 If you are using a .22.250 try around 39.5gr of H380 with CCI br primers.I have used load in several rifles and found it very accurate. Cheers SEAN Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.