1967spud Posted October 22, 2011 Report Share Posted October 22, 2011 Has anybody who is shooting this calibre noticed loose primer pockets after 2-3 firings? Link to comment Share on other sites More sharing options...
6mmBR Posted October 22, 2011 Report Share Posted October 22, 2011 Has anybody who is shooting this calibre noticed loose primer pockets after 2-3 firings? Are you still using reloader 17 Mine are fine after 3 firings Cheers Dave Link to comment Share on other sites More sharing options...
1967spud Posted October 22, 2011 Author Report Share Posted October 22, 2011 No this info is for a mate who is shy. Come on down cowboy. Link to comment Share on other sites More sharing options...
6mmBR Posted October 22, 2011 Report Share Posted October 22, 2011 No this info is for a mate who is shy. Come on down cowboy. Charlie ran into some high pressure issues with Rel 17 which probably did the damage. May be a case (pun not intended) to start again with new brass and H4831SC. Cheers Dave Link to comment Share on other sites More sharing options...
taylor Posted October 22, 2011 Report Share Posted October 22, 2011 3 reloads - your having a laugh ,mine on 14 and still tight but well anealed ,you must be going 3000+fps i ran my broughton up to 2975 fps and had no probs with any powder ,my - used r17 in his barrel at 3000fps+ and is close to 10 reloads are you using custom dies ? Link to comment Share on other sites More sharing options...
1967spud Posted October 22, 2011 Author Report Share Posted October 22, 2011 hope you are reading this cowboy Link to comment Share on other sites More sharing options...
1967spud Posted October 22, 2011 Author Report Share Posted October 22, 2011 hope you are reading this cowboy told you it should be 54 grains not 84 lol Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.