lee w 118 Posted June 28, 2011 Report Share Posted June 28, 2011 hi there everyone,can i use SEEKINS PRECISION bottom metal 5 round magazine system on a SAKO 75/85 action,or is it only remmington it will fit. many thanks LEE Link to comment Share on other sites More sharing options...
Gunsgobang88 Posted June 28, 2011 Report Share Posted June 28, 2011 hi there everyone,can i use SEEKINS PRECISION bottom metal 5 round magazine system on a SAKO 75/85 action,or is it only remmington it will fit. many thanks LEE Hi, The Seekins is only available for the Rem. 700 and clones. It would not be cost effective to even attempt to modify to fit other actions, pity really as the Seekins is probably the best looking of all the 'tactical' bottom metal, Alan Link to comment Share on other sites More sharing options...
lee w 118 Posted June 28, 2011 Author Report Share Posted June 28, 2011 Hi, The Seekins is only available for the Rem. 700 and clones. It would not be cost effective to even attempt to modify to fit other actions, pity really as the Seekins is probably the best looking of all the 'tactical' bottom metal, Alan many thanks alan,regards lee Link to comment Share on other sites More sharing options...
ejg223 Posted June 28, 2011 Report Share Posted June 28, 2011 Probably not cost effective, but when done very satisfying. My old Sako has a Howa/AICS mag system on it and works very very well. If the action screw holes are way off then you can screw the action into the stock with it's own set of screws below the bottom metal. Then have two seperate screws holding the bottom metal in place. Best done with a composite stock. Just also check other bottom metals, such as howa or tikka. edi Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.