TonyH Posted December 12, 2010 Report Share Posted December 12, 2010 I've found references to a "Redding #1 Form Die" in 20 Tac but I do not see it listed in their catalogue, which is puzzling. Anyone clarify this, or recommend another good quality die for forming 20 Tac from .223? Thanks, Tony Link to comment Share on other sites More sharing options...
6mmBR Posted December 12, 2010 Report Share Posted December 12, 2010 I just run a .223 case through a Redding .20TAC full length die. Seems to work just fine. Cheers Dave Link to comment Share on other sites More sharing options...
Scotch_egg Posted December 12, 2010 Report Share Posted December 12, 2010 Dave, What lube do you use? I keep crushing shoulders using my full length die. Link to comment Share on other sites More sharing options...
TonyH Posted December 13, 2010 Author Report Share Posted December 13, 2010 Dave, What lube do you use? I keep crushing shoulders using my full length die. Good question! But thanks, Dave, be good if I can do without an extra form die... Tony Link to comment Share on other sites More sharing options...
6mmBR Posted December 13, 2010 Report Share Posted December 13, 2010 Dave, What lube do you use? I keep crushing shoulders using my full length die. I use RCBS case lube. Your probably using too much lube and getting hydraulic dents in the shoulders. Lube sparingly and only the case body. Could try Imperial sizing wax. Cheers Dave Link to comment Share on other sites More sharing options...
Scotch_egg Posted December 13, 2010 Report Share Posted December 13, 2010 I did lube the neck with lee sizing lube. I'll try again with just lubing the body. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.