bri2506

Rem Sa action currently chambered in 222, still a shooter not sure of round count as it was bought second hand. Been sold as an action really The action has some scroll work on side not sure if that makes a difference, see photos Apex extended rail £80 £350 plus rfd or I’ll deliver within 20 mile of Preston

Mc millan hunter fully bedded for rem SA Has had a Lawton action in it so has a side bolt release notch in it. HS metal work and 2 mags included £400 plus p&p

Once you have blue dot flashing on Bluetooth page of StrelokPro then switch use phone compass then point phone in direction of fire press calibrate then switch phone compass off and you should have new direction saved. If you change dof again repeat process.

Blue

If you down load the weather flow app for it you need to calibrate the compass on it. Then switch to StrelokPro and hit the blue symbol then it just pops up with readings

What are you struggling with

Have you any pics

Has anyone any data for 2506 using v160 with 117 grn. I’ve tried v165 but it doesn’t like it. It’s a 20 inch Sako 75. There doesn’t seem to be as much data on The internet As there used to be or am I looking in the wrong place. Any help is appreciated

Would Anyone have any redding bushes to buy or lend till I can get some delivered near to Preston within 30 miles. I’m after 286 or 285

Cheers that's the plan. Just on with ordering a fl Redding s type so I can do it in one die.

It was off sd

In hindsight you’re right. They were some loads that I had loaded of the original load but with 2 thou shoulder bump in cases. The load was developed by the gunsmith who built the rifle so you would have thought the load should have been some where near. I thought bumping the shoulder might have sorted the bolt lift issues. The bolt weld was not the best in first place by the looks of things.

Lawton 7000

I tried putting the loads it came with over the chrono yesterday and the bolt nearly locked up solid. So much so that just as I got the bolt open the spiral staircaseing handle snapped off. Not impressed is not the word.

24.8. And I weighed one to check. He had only been using a neck die and cases were stiff to load so I bumped 10 back and loaded them but still a heavy bolt lift and flattened primers. Been looking at bits on Internet and they are saying use 20 tac loading or ruger with 2 grains less. Just after advice

Has anyone any loads max min for 39 grn using v133. I've bought a rifle that came with a load but it has heavy bolt lift and is showing pressure signs on cases. Was looking to work up my own load but can't find any in any of the manuals. Any help would be grand cheers

This is who I got original rail off. I've emailed them cheers

A custom mount would be better than a extended rail then I don't have to change the rail if move it round on rifles. Not sure who would make one though. Any thoughts anyone

Does anyone know anyone that could machine a extended picatinny rail off my rem 700 so it would fit a Lawton 7000 action. Can't seem to find an extended one for the Lawton. Drone doesn't sit far enough back on Lawton

That's annoying. I'll have to get another. Cheers

I have an extended rail made by dcr for a short action 700 for my drone. Was thinking of changing rifle and was wondering if it would fit on to a Lawton 7000 action.

Any offers

Ttt

Open to offers

25 mm optilocks included