English Rifleman

TTT Price reduced to Match other advert.

5 hours ago, banus02 said:

good afternoon ,can you tell me why you have stated the barrel on the rpr is a stamped 308,this would be done at the factory or have you replaced the barrel ? also the rpr comes factory supplied with two magazines. would love to buy the semi auto 22lr but it will take my police force at least 12 months to do a variation !

I have stated what is stamped on the rifle, so a buyer will have to have .308 on there ticket (not 7.62). & it is a Factory barrel.

Go on have a punt on the 22LR Good cheap fun.😝

PM Sent

1.     Ruger Precision Rifle Gen 2    .308

As it is quite well known, these rifle shoot very very well for a of the shelf unit. (This one included)

20Inch Factory Barrel Under 800 Rounds.  Only shot light loads 155 Lapua & Imperial Match 155

Purchased Late Dec 2019.  And spent all of 2020 Locked away. Very good condition and well looked after. ( Not been stored in an unheated area )

Miculek 308 Muzzel Brake & 1 x 10 Round Mag

The Barrel is stamped .308 for FAC

Only Selling to open a slot on my Fac.

£1075.00  Excludes any RFD fees

PLEASE NOTE

BIPOD, SCOPE & RINGS NOT INCLUDED IN SALE PRICE.

2.     Smith & Wesson  MP15 / 22    .22LR

Purchased Aug 19  Also spent whole of 2020 Locked away. Very good condition and well looked after. ( Not been stored in an unheated area )

These Rifle are just Fun to shoot and Surprisingly accurate.

Only Selling as i have purchaseed BAR AR22

Fitted Mount & Vortex Crossfire   2 - 7  x  32  Scope ( Included )

1 Mag Included

£ 495.00 Excludes any RFD fees

Dito (no Boyds) But UPS SUCK lots of paperwork and copies of FAC (for non controlled items) and You pay all the fees as you should, AND then ups want a stupid fee for doing this..

i will pm you

What bullet wieght did you choose?

Nice groups

1 hour ago, JohanM said:

Thanks, probably missed that in the rule section.

Just keep posting replies, youll soon get to 10

5 hours ago, JohanM said:

Hi banus02

I can't find the Wanted Section in the forum. Maybe just me being pc illiterate. Can you point me in right direction pls?

Will message you about rifle.

You need to have more than 10 posts  then the section is visable to you.

I have to agree with the above posts.
It's some of the clubs that are discouraging new shooters.
I have a range new me and i think it's run by its own club.
Its only 50 Mtr but would be perfect for zeroing and other short range practice, But it is impossible to obtain a membership. you HAVE to be invited by one of the existing members, to even be given an application form.
A couple of years ago when i obtained my FAC i was allowed to attend an evening shoot as a guest, but not guaranteed a shoot,  i would be allowed to shoot once all members had had their play.
My Son (33) who had just finished his NRA probation and had been issued his SCC but had not yet received his FAC was refused point blank to even handle a firearm. But he was allowed to watch.
we have never been back nor will i ever try again with this lot of "Old Boys"
So i can see that if you are not dedicated into this, that it would be easy to give up.
Luckily the NRA are very welcoming to new members, Because without the NRA i for one would have struggled to find my way into this sport.

Just my opionion.

i found the fixing screws in the tier ones a bit flimsy & easily damaged, by the not great quality driver bits supplied.

Also just recently had the use of a brand new set of Burris XTR rings and although i found the issue and resolved it.

When all the correct shims where fitted inthe correct places (to give 20 Moa Elevation), something just didnt do up correctly first time and no matter how much wind was dialed i could not get scope bore sighted.

I then noticed that the front bell of the scope was not sitting dead centre of the Pic Rail??

After removing and refitting spacers (all in the same configuration) it finaly sat centered on rifle and i was able to bore sight & first shots hit centrally on target.

I really did not like the variation that these rings gave, wether that was user error or poor design? i dont know. but to much possiblity of error for my liking. I am just glad i hadnt purchased these mounts, would have been disappointed

I have standard burris uni-mount and its great, no issues,

I know these are not in the same price range, But Spuhr and just fantastic.

I was at Bisley today and

Anyone into American cars Mostly modified and old,

This weekend Bisley is full of them, Looks like a hugh event, there is even a wall of death.

That sounds Great.

Please keep us updated, regarding after recovery period.

i had been (wrongly )told that, you will have to choose between focal lenghts.

I.e good short / bad long  or bad short / good long.  

from what youre saying it sounds like you got good short / good mid & good long. if thats the case then, massive benifits.

have a speedy recovery, all the best.....

7 minutes ago, John MH said:

Odd, was not aware that it is not visible to new members. 

 

You need to have 10 Plus posts to access "Wanted"  Same as when youre not signed in. The wanted section is missing.

4 minutes ago, John MH said:

This is the for sale section, not 'Wanted'. This post has already been moved once.

The OP has only 3 posts.  I dont think the wanted section is visable to him yet.

2 hours ago, VarmLR said:

Just had to replace my gosystem fine flame brass torch after a couple of scary flare ups and it not shutting off!  Has anyone else experienced this at all?  Also, I can't seem to buy the blue map gas cylinders on amazon any more which I usually use, just the yellow Mapp gas plus...not sure of the difference...are these ok for the annealer use?  Not sure of the flame temp, but with the blue bottles, it worked out at just over 4 seconds for my creedmoor brass

Blue Bottles are Propane.

Yellow bottles are a mix with added Acetalyne (If i recall correctly)  MUCH HOTTER FLAME

Blue bottle Amazon  https://www.amazon.co.uk/Propane-Bottle-Disposable-Cylinder-plumbers/dp/B07D5KQDXK/ref=asc_df_B07D5KQDXK/?tag=googshopuk-21&linkCode=df0&hvadid=344153295811&hvpos=&hvnetw=g&hvrand=849642966969292152&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1006943&hvtargid=pla-700619512783&psc=1

Blue & Yellow available from screwfix, aswell as numuros other places.

can i have these please

Pm Sent

Agree

Dont get to see that everyday.

Really sorry to hear this.

Hope Paypal sort this for you.

But it might be a good idaea if Admin take this down before it gives other Tossers the same idea.

Good luck Pbear

5 minutes ago, Jim_halpert said:

6.5 creedmoor ....

I think he's refering to your Size description.  CM.    he is asking if they are really 6.5cm Creedmoore Case's (Shells)??

Just send it back

Sfs

2 hours ago, kwakkerjack said:

Click on one of the sub-categories and then you can see the brands.

 

@1967spud Perhaps you can add the brand filter at a higher level page.

OK got it, now. Thanks

Good luck spud.   Now all we need is stock

3 hours ago, kwakkerjack said:

Not on my Desktop.

Got on.

But i still find searching through the bullets painful.

For example

i select Bullets,  then narrow down to .223 / .224  but i can not just display one brand (& just one brand) at a time.

would be cool if i could

Good luck with the new site.