Lloyd

iIs probably the thermal scope I have mounted there a c*nt to zero. Ill throw the day scope back on it and see if that will hold zero

Have had to re zero it three times in recent weeks. bullets are hitting lower than when i zero it at 100 yards. 1.5" low first time 3" low second time and 2" low third time. very little windage corrections on all three occasions but they also had to be made

Toast

👍

First video is the replacement barrel that Tikka fitted i hadnt even fired the gun Second video is after 70ish shots in the 4 months

https://youtu.be/PnNKhZ2Dc3w https://youtu.be/7f4LSbs9mxk Links to the videos

I see that in their warranty but I have not used reloaded ammo in this barrel

I only have the gun back 4 months! And the bore snake only does an oil clean out after being out of the safe even if it has not been fired on a shooting trip

If I shoot strings they are 3 shot strings which since I got the gun back have not done many of. No more than 3 occasions. Its been cleaned regularly because of what happened last barrel i use the KG line of cleaners KG-12 and KG-Copper eliminator and after each shoot it gets a minimum of brunox gun oil and a bore snake through it.

https://ukvarminting.com/topic/51827-tikka-tac-a1-308-barrel-pitting-issues/

So I got the rifle back after 10 months with the barrel replaced by Tikka in Finland. I continuously had to chase both the supplier and retailer throughout the whole process. The first thing I did was scope the barrel for my own record on 10 Apr 2021 barrel was dirty which I expected from test firing so i cleaned with KG-12 carbon remover before I mounted and got the gun ready to set up to zero . On the 30 Aug 2021 after 70 rounds down the tube I re scoped the barrel to discover the same problem starting to happen once again. I was super cautious with the new barrel and took very good care and took every precaution to keep it well maintained. Have contacted the retailer and advised of the problem once again they are trying to blame me this time by the few emails that have gone back and forth. I have now advised the retailer because of his terrible attitude that he will have to deal with my solicitor this time as I want my money back this time and refuse to send the gun away again for another shitty barrel to be fitted and be without it again for god knows how long. I've seen other threads on this site for the same Tikka T3 TAC A1 gun in different calibers with the same issues since I originally started this thread.. (Links to threads to follow) (Links to Youtube videos to follow) *ADVICE* To anyone considering buying a Tikka T3 TAC A1 is don't unless you are going to immediately going to rebarrel it.

Whats your location

Any thoughts on a brux barrel

Still shooting good but it's the time of order to time of delivery im concerned about brexit has f***ed everything... at the moment I reckon its going to take about 8 months to get a new barrel

I bought it second hand I've put close to 3000 down the tube. It has fire cracking plus a small bit of pitting lands are ok for the moment but because of the country I live in I have to look at least a year ahead