Gungrinner

On 8/6/2020 at 6:51 AM, MGNZ said:

I put together an open source Arduino based controller for DIY annealing during our COVID lock down. Check it out here: https://www.mgnz-makes.com/

Looks nice. Good job there sir.

I can report that both the 80gr HELDM and the Berger 85.5 gr both fit in my plastic aics mag. JUST👍 

Loading can be problematic if you have a steep feed ramp. 

Put the newer Berger 85.5 gr Long Range Hybrid Target Bullets and the hornady 80 gr eld match. Both shoot very well out to 600yrd in my sassen barrel.  

pm sent

I don't think the electronic targets with pick up 22lr.

Sightron. If you can get a good used one even better.

Just out of interest what calibre would you used those on? .223?

Thanks

I was getting some strange vertical fliers with intarso's this week at 600 on target 44.  Shots were up and down as much as 1.5 moa. Never had that before with the same batch of ammo. Some shots not picked up at all with ggg 69g ammo I had a go with. Need to do some more testing on a calm day.

Wet and windy Sunday a few weeks back at 300y.  First 2 shots were sighters. Need a bit more practice with the windage.💨💨🙄

Hello,

Please can i have a quote for your annealing machine. 308, 6.5cm and 223. Posted to uk

Thanks

I think I remember reading somewhere that a 600 yard centre was stuck over the 800 and 1000 yard target to make it harder. I am asking because I have downloaded a plot sheet for 1000 yards at Bisley. This shows V as 0.3moa and the 5  0.6moa. Could be all rubbish but i would like to know if the plot sheet is correct.

2 hours ago, One on top of two said:

10” + 5” 

Thanks, Do you know what it was before the changes?

I believe Bisley has changed the F-Class 1000 yrd face size in 2019. What is the size of the new Bull and v-bull please.  

Thanks

I think the add was up for about 5 mins or less before it was sold. I was too slow. 😴

His trigger spring are spot on. Be prepared to pay vat and postage charge.

Thanks. I hope to get up there on Sunday afternoon. 

Dose anybody know where I can get some Lovex SO65. I want to try some in my 6.5cm as the last time I shot it at 8c I had lost 100fps. Looking for something a bit more stable.

Dorset, Hampshire or Bisley. 

Thanks

The eldm are cheap so I thought I would give them a try. If there don't work I will move to the more expensive new Berger 85.5 Grain Long Range Hybrid Target with an impressive but BC. 

https://bergerbullets.com/new-berger-22-caliber-85-5-grain-long-range-hybrid-target-bullets/

11 minutes ago, Re-Pete said:

OK, I started at the beginning this time 😁   How did you arrive at a speed of 1300 fps at 1000 yds with N140? I ran this through Quickload, assuming a 100% fill, and it didn't get anywhere near.

I'm interested because I have a 223 M595 with a 30" barrel, and I've had a lot of fun shooting it at 1000yds. I use RS52 powder which gives me an MV of 3050 with an 80 grain SMK, just about supersonic at 1000yds on a good day.

Pete

I ran the numbers through the hornady ballistic app

Had the rifle a few weeks now and managed to do some load testing at Bisley Siberia yesterday. Found a good node that should get to 1000 yrds at 1300fps. Happy days. hopefully stretch its legs later this month at 300 and 600. 

Sold

WEAVER 30 mm Six Hole Tactical Medium Rings.

13 mm from base to ring.

A1 condition all round.

£35 Posted uk 

https://www.opticswarehouse.co.uk/weaver-tactical-30mm-scope-rings-6-hole-caps-medium

pm sent

£25 for 100 plus postage sound about right. 

N140 as it's the only suitable powder I can get locally.