Deker

1 minute ago, garyw said:

which ones ?postage is extra as in the op.

Whichever he takes I'm interested in the other one 😀

All sold

Hi,

Due to an upgrade I have the following for sale:

3 x RCBS TrimPro 2 with spring shell holder - 1 unused no pilots, 1 lightly used with pilots (missing .44. & .45) and one lightly used with all pilots - £100 inc postage EACH
1 x DACam Power Pod for Trim Pro2 - £80 posted
1 x .223 three way cutter (unused) - £70 posted
1 x 6.5mm three way cutter (unused) - £70 posted
1 x .30 three way cutter (lightly used) - £70 posted

Also advertised elsewhere

Thanks

Deker

I'll take one of the containers of anhydrous citric acid powder please, I'll be at the Imperial so can pick up and pay there

As title, I have a set of Audere PSR Gen I 34mm scope rings, they're the low ones that mounts the centre of the scope 30mm above the picatinny rail, decided to go a different route with scope now (new scope will be 30mm)

looking for £80 posted (in UK)

Also advertised elsewhere

As title, I have a new set of Audere PSR Gen II 34mm scope rings, they're the low ones that mounts the centre of the scope 30mm above the picatinny rail (specs in the images), they've never been on a rifle as I wanted some Burris adjustable instead and these were part of the scope purchase.

SOLD

Will you take £100 posted for the RCBS Trim Pro 2 with pilots?

15 minutes ago, No i deer said:

If you go on the forum just scroll down to 7mm 30 cal and big stuff or words to that effect you'll see it..

I think it was a 300 Norma improved but the reference was on the bullets more than the calibre..

It's a very accurate cartridge

Thanks will have a look 

3 hours ago, No i deer said:

I think the 230gr Atips are working very well..

They like them on accurate shooter. There's a thread on the 300 Norma now

Thanks, I've just registered on there now, I don't suppose you could send the link could you?

Hi, 

What bullets are people using with their 300NM? It's a 1:9 twist and I'll be using Lapua brass with RS 80 but haven't decided on the actual bullet, I've been looking between 215gr - 230gr and the following are all around the same price point so any advice will be welcome:

Lapua Scenar-L 220g 

Hornady ELD-M 225gr

Hornady Match 225gr

Berger Long Range Hybrid Target 220gr

Berger Hybrid Target 230gr

Thanks

Derek

45 minutes ago, MrDuston said:

Still here

I'll take them if Fizz doesn't

17 hours ago, Kenblock said:

Are both sets sold if not I’ll take the high rings if they are still available please 

Both sold I'm afraid

SOLD

Hi, 

Due to some recent swapping around I have the following for sale:

1 x Vortex Pro Series 30mm tube and low height (0.9" / 22.86mm) - SOLD

1 x Vortex Tactical 30mm High Rings (1.18" / 30.0mm) these have been cerakoted in armour black -  SOLD

Prices include postage but not PayPal fees

Items also for sale elsewhere

I'd be interested in some of the cases if they're small rifle primer? either the 60 or 100?

SOLD

As above good used condition, unfortunately has a few cosmetic marks as seen in photos, looking for £38 posted

SOLD

Sold

48 minutes ago, n3al said:

Cheers, I wanted to see how hard it would be to convert to left handed, looks like a new stock would be cheaper 

Order sooner rather than later as there could be import and customs issues next month 

1 hour ago, n3al said:

Do you have a picture of the inlet

Hi, 

Yes I've attached them along with the Atlasworxs footprint

Atlasworxs Bottom Metal for Tikka T3 SA Foot Print.pdf

Just now, Xtrema said:

Is that a Picatinny rail on the fore end?

Hi, 

Yes it is, it was an optional extra I bought on the original

Due to a change of mind I have a brand new unused (replaced under warranty) Ranger gunstock by German Gun Shop for a right hand Tikka T3(x), for those that don't know here's the sales description:

"It consists of multiple cross-laminated birch wood layers, which are soaked together in epoxy-resin and bonded after milling with an extra epoxy resin-skin. The Epoxy gives the Stock a hard surface which effectively protects it against scratching or dents. Our colors are also made of colored epoxy resin. This makes it not only splash-proof, but even submersible! This "Cross Over" combines the positive qualities of "absorbing power" of a solid wood stock with the robustness and precision of a synthetic stock.

It is ambidextrous and both sides usable to get, for example, in stressful hunting situations quickly and safely leveling of the gun for all types of standing, laying or sitting. The handle area as well as the foreend is coated with a special grip varnish, to offer secure handle with sweat or wet hands always.

Stocks have a solid full-block-bedding made of high-grade 7075 Aluminum with an integrated stainless steel recoil lug. The advantage is its extremely high tensile strength, which is higher than the tensile of steel for structural purposes, yet very light.
Thus, the Action is kept absolutely firm and torsionally stiff!"

NOTE: this stock has been provided from the factory to use a AtlasWorxs DBM (https://www.atlasworxs.com/collections/tikka-t3-t3x/products/atlasworxs-bottom-metal-dbm-tikka-t3-short-action) so would need one of these if you don't already have one.

The current price on these are £692 so would accept £550 o.n.o posted

This is also for sale elsewhere.

Sightron SIII SS 10-50×60 Long Range Target Illuminated LR MOA Reticle: MOA-2

Only replacing as I've replaced with a scope with more elevation for longer range shooting as I ran out of adjustment with this one at 1200m.

It comes with a Sightron front flip cap, instructions and cloth, unfortunately I no longer have (or at least can't find) the original box.

++++++SOLD++++++

I'm also selling some Vortex Pro Series 30mm Low Scope Rings which I used with this scope which would be £50 extra if bought with the scope

Also for sale elsewhere

now sold