JockStalk

Bump

For sale, lightly used and in very good condition. Very well made floor plate for Remington and clone short actions. 
You’ll need a spring and follower as this is the floor plate only. 
Matt stainless with a sako style release button outside the trigger bow. 
Never a risk of a forgotten mag and nothing to snag when in the thick of undergrowth or accessing high seats. 
Replaced rifle with one of Callum’s, which of course came already fitted with one 😁
£200 posted to UK address. 
 

Sorry - sold

Vermin bullets are typically frangible, lead shatters/ vapourises through the carcass. 
Hit a bunny at 4000fps and ‘picking up’ might be a challenge. 
It’s not that a raptor feeds off a carcass that is lead contaminated and drops dead, the lead accumulates and they lose condition, die a slow death. 
As a kid, seeing a buzzard was a rare sight. Thankfully that’s not the case now, all raptors are making a comeback - the red kite being a great, common sight locally. 

Thanks for taking the time and appreciate the insights. More to mull over! 
I don’t like putting lead into vermin to then let it accumulate in raptors etc. that’s the reason for copper rather than lead. 

Hi - is this still for sale? What’s the twist rate of the barrel? 

So after complete changeover of the cabinet, I’m thinking 53gr yew tree TLR is the bullet, pushed fast 3750 plus. 
220 swift in 7 or 8 twist. Barrel might need a bit more length, but that’s kinda where I’m thinking. 

Is the 224 Valkyrie a contender???

Thanks for the detailed thoughts @Scotch_egg - hope it’s a bit of a distraction to keep the boredom at bay! Heal up and get back at it soon. 
22-284! I can imagine that will have a shortish barrel life. I’ve a 6.5-284 inbound and was thinking that would be hard enough on the barrel. 
Mulling over your views, I think the cost side of things is certainly going to be one factor. Might even be worth having clone setup to another more expensive chambering I’ve got for cheaper practice! 
A quick google and thinking shortening a 22-250 might be a bit boomy. Shorter barrelled treble or 223 might be the option then. Would likely give me options for copper in future too. 
Narrowing it down a bit, at least to start window shopping and depending on what’s about, maybe talking to someone for a build. 
👍👍👍

21 hours ago, stephentri said:

.223 shooting 77grain tmk 

Flat shooting?

Barrel life probably not that important to me to be honest but it would probably bug me if I had to change at 1200. 2-3000 would be fine. Would be more bothered about it being accurate and delivering a decent punch within 400m

For vermin. Mulling over choices of 204 Ruger, 220 Swift, 20Tac, 22Creed, 223, 222, 22-250……..

If it’s a short (18 inch) and pointy thing. Unfussed about heavyish barrel contour. And a nice to have, but not essential would be 50gr bullet weight capable. 400m max but accurate enough for crows, fox etc (appreciate all will suffer drift) 

Ideally in a rem700 short action footprint. 

Whats the wisdom on chambering and barrel twist? 
 

Bump

162gr Amax off bipod at 100m 4 rounds 0.7” and 120gr TTSX 4 rounds for 0.6” 

Varberger 7x57 in good condition, barrel deep blued, stock shows use but overall very good condition. Pillar bedded. Blued steel trigger guard. Comfortably shoots under an inch at 100m, 9 twist barrel shoots 100-162gr consistently well. Threaded 1/2”UNF With thread protector. Sportier weight. Pic/weaver bases for your choice of rings. Ebony forend. Trigger breaks nice and crisp. This is a strong modern action that can be safely loaded to modern pressures. 
Complete with .30 Atec Maxim moderator in very good condition. 
I have a very clean Schmidt Bender 8x56 30mm tube with rings that can be supplied if a complete package is required. 
(scope/ rings/ sling/ bipod not included) 
£295 including RFD fees at my end. £500 with S&B scope. 
 

US Optics B25 unmarked (other than slight witness to retaining screw on erek adjustment shown in pic). Glass immaculate, body immaculate, all works as new. Illuminated. Tracks perfectly. 79MOA elevation .

5-25 mag, FFP, MGR reticle MIL, elevation 100 clicks @1/10MIL, 34mm tube, lo profile rapid focus eyepiece. Superb glass.

MIL/MIL keeps things simple and a very fine center dot aim point. US Optics can change reticle if ever required.

Unlimited warranty. I bought this new from Optics Warehouse

Selling for £1650 posted RMSD.

(From US Optics own website: Our warranty: if any our product proves to be deficient U.S. Optics will repair or replace the product, regardless of transfer of ownership, for life.)

review: https://coldboremiracle.com/2018/08/13/us-optics-b25/ 

New, unmarked correct one piece Spuhr mount for the above scope, Spuhr 4003B. 38mm height, 34mm tube, 0MOA. £200 when purchased with the scope. (£340 new)

Both boxed, all manuals, Allen keys, alignment wedge etc.

Go on, treat yourself 😁

Bump

Remington 700 action trued and fettled by Neil, and a new M40 profile border cut rifled stainless and Matt blasted 24” 8 twist barrel fitted. Threaded for mod with ‘invisible’ cap.

From Neil’s description when I bought (July 2020)
Got a trued Remington with Tier One rail, big knob and new recoil lug fitted with a new proof only Border cut rifled 8T M40 profile. Screwcut M18x1mm with hidden thread protector.
24” barrel, 20moa rail, black action, barrel is fine grained stainless at moment but could bead blast it if you want the shine off it.
(he blasted it)

Will come with the rail, thread protector and Remington trigger. Can also come with ASE mod if required.
Way more accurate than me. Had 120 rounds through it, I’ve had since July 2020 and hasn’t been out enough!
£700 for barrelled action, rail and trigger and I’ll pay RFD fees my end if not face to face. Mod will be £200 sold with barrelled action and it was new when put on the rifle.

If buyer wants, there is a Rifle Basix L3K on the rifle and not included in the above price. I can sell this for an additional agreed amount if required. It’s a top safety, 2-6 ounce adjustable pull weight, currently set 4 ounce. 
 

Advertised elsewhere too. 

Sold

Up

Sold subject to usual

As per description, beautifully made, deep blacking on steel, return to zero reliably. Just a fine set of rings. 
£100 posted to uk address PayPal or BACS preferred. 
Base screws are 22mm apart, both same, concave to fit convex action. 

Identical to those fitted to my thermion in the photo and as new condition. Complete with fitting instructions. 
£200 to uk address, PayPal or BACS please. 
price is for rings, thermion not included 😉
 

I was looking for another of these a while ago - fantastic stocks! Had to find an alternative / darn! 

Nosler solid base 140gr 7mm molly coated. Coating can be tumbled off if not needed. 145 total and yours for £33 posted uk