Jump to content

spartan7510

Members
  • Posts

    299
  • Joined

  • Last visited

Posts posted by spartan7510

  1. SPORTSMATCH ATP72 2 PIECE 30MM WEAVER/PICATINNY SCOPE MOUNT. Condition is Used. £60 including postage or collection Wokingham, Berkshire.

    Purchased brand new, Very Good Condition with little use. Was mounted to my Accuracy International with Meopta Scope, decided to buy one piece Accuracy International mount. these have been used on my rifle around 3 times, been sitting in packed away for past couple years. 
     
    Made in England and established for over 30 years. Makingmounts for civilians and armed forces around the World! Only quality materialsare used in production.

    Two Piece Double Clamp mount for 30mm  scopes to fit both Weaver and Picatinnygrooves.

    These are special because they are adjustable forheight/elevation!

     A (height from bottomof mount to bottom of cradle)  = 21 –22.5mm  (use this measurement to ensurethey are high enough for your purpose) 

    B (width of each mount) – 21mm 

    Weight 134g

    Adjustable up to 50 MOA.

    High tensile construction with a totally solid mechanismutilizing fasteners with a special anti vibration coating.

    Both front and rear mount adjusters can be used to liftscope evenly or independently as required. Mounts come with instructions.

    IMG_2860.JPG

    IMG_2862.JPG

    IMG_2863.JPG

    IMG_2864.JPG

  2. Vortex Optics STRIKEFIRE II RED/GREEN DOT - very good condition with very little use. Condition is Used. more photos available upon request.

    £145 posted or collection from Wokingham, Berkshire

    Purchased brand new and used a handful of times on Huglu XR7 section 1 shotgun which was returned due to feeding issues. Have since purchased a Beretta and dont need red dot.

    This is red/green dot variant so can swap between colours for different lighting conditions

    When situations demand split-second target acquisition and maximum field of view, mount up the Strikefire II and get shooting. Compared to its smaller red dot cousins like the SPARC AR or Crossfire, the Strikefire II’s larger objective and 30mm tube design provide a larger field of view, and allow it to be mounted at just about any height using most common 30mm rings. A 4 MOA dot is easy to acquire quickly, and is available in red only or user-selected red/green. From AR-15s to shotguns, the Strikefire II offers big time versatility at a price that won’t break the bank.

    The lower 1/3 co-witness cantilever mount model is ideal for AR platforms, positioning the optic bore center 40 mm above the base surface.

    57978305875__9FB36336-39AE-4D6D-B95E-82BC37D122FD.JPG

    IMG_2809.JPG

    IMG_2805.JPG

    IMG_2810.JPG

  3. Vortex Optics Cantilever Ring Mount for 30 mm Tube with 2-Inch Offset: ADR Mount. (Model CM-202) Brand New and unused still in original packaging, cost over £90 delivered. Was going to use along for Vortex Strike Eagle (also advertised) for Marlin CSBL 1894, however decided to stick to my iron sights.

    £70 posted or collection welcome from Wokingham, Berkshire
     

    IMG_2795.jpg

    IMG_2798.jpg

  4. Have 2 of these, this was mounted once in rifle so good condition, includes original packaging, pouch, instructions and 2 brand new batteries. £33 including postage

    Sightmark .223 Boresight
    Tested and recommended by the National Tactical Officers Association USA, the Sightmark®.223 Boresight significantly reduces wasted bullets. Chamber the device in your .223 rifle like a regular bullet, and a red laser dot shows exactly where you're aiming. Simply adjust your sights or scope, and save your extra ammo for the hunt.

    Chamber-Mounted Laser Helps You Sight In Rifle Or Pistol Without Firing A Shot
    Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on the dot, compensating for sight offset to prevent gun from shooting high. Go to the range for test shots and final sight adjustments. Store boresighter in the included nylon carrying case that fits easily in a pocket, tool kit, or range bag. Available in a variety of calibers, listed below.

    IMG_1945.JPG

    IMG_1953.JPG

    IMG_1954.JPG

    IMG_1955.JPG

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy