dannyt Posted September 18, 2011 Report Share Posted September 18, 2011 thanks for the info Link to comment Share on other sites More sharing options...
Ronin Posted September 19, 2011 Report Share Posted September 19, 2011 The load I settled on was 67.5g RL 25. Like Grant, I went up to 69g - hard on brass. I would start at 65 Neck tension als makes alot of differnce with accuracy in this calibre...... Link to comment Share on other sites More sharing options...
6mmBR Posted September 19, 2011 Report Share Posted September 19, 2011 My old barrel had 1200 rounds through it I used 200 Norma 300 WSM cases prepped (312 nk) 7mm/270WSM reamer. 270 WSM bushing die with 308 (I think) bushing 7mm WSM Forster seater 300 WSM body die with .040" turned off the base... RL 25 All still have tight primer pockets and before I decided to pull barrel es was single digit at time of last chrony session. Two more Broughtons ready for duty in November......once ive finished a certain BAT M for someone....... Hi Andy good to catch up although very breifly. The .270 die is fine? Just checking that the neck shoulder junction on the die would not interfere with access of the slightly larger 7mm case to the bushing? Cheers Dave Link to comment Share on other sites More sharing options...
dannyt Posted September 19, 2011 Report Share Posted September 19, 2011 managed to get hold of some norma brass , but its like hens teeth . There will be some more in the country in mid october so act fast if you want some . £1.38p per case WOW. Link to comment Share on other sites More sharing options...
Ronin Posted September 19, 2011 Report Share Posted September 19, 2011 Dave 270 Die works just fine - the bushing works down to almost base of neck shoulder junction. Danny - is that trade price.... Link to comment Share on other sites More sharing options...
dannyt Posted September 20, 2011 Report Share Posted September 20, 2011 Ronin No its not mate , I asked John for a price at HPS none in the uk at the moment, He said to expect some in mid late october. I think i will get a few cases in salt as they dont make much of it , its a case of get it when you can. Link to comment Share on other sites More sharing options...
6mmBR Posted September 20, 2011 Report Share Posted September 20, 2011 Dave 270 Die works just fine - the bushing works down to almost base of neck shoulder junction. Cheers Andy, got a magnum P sorted. Can now get on and order dies. Cheers and see you at the Europeans. Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.