Jump to content
UKV - The Place for Precision Rifle Enthusiasts

Nfarmer

Members
  • Content count

    210
  • Joined

  • Last visited

About Nfarmer

  • Rank
    Advanced Member

Profile Information

  • Gender
    Male
  • Location
    Worcestershire
  • Interests
    Making lots of loud bangs!!

Recent Profile Visitors

511 profile views
  1. I have fulfilled recent orders and now free to take new orders, but please note the production takes some hours for each batch and if I have more than one order there can be delays. Powder Speedloaders. These hold six charges ready so that all six chambers are charged as one, by the cylinder being placed onto the charger and then all being inverted. The lid is held on by a magnet so no powder escapes. I can supply these either in silver or black for £7.60 each or £75 for ten. Powder Speedloader Charging Funnel Just to make it easier to load the charger I also designed a simple charging funnel to avoid powder loss. Supplied free with an order for 10 Powder Speedloaders or as a separate item £5 Bullet Loaders Again to load 6 bullets at a time, slightly more tricky to use as you have to tilt both the Bullet Loader and the fully charged cylinder but it will place all six bullets at the same time. Bullets retained by a top held on by a magnet. I can supply these either in silver or black for £6.50 each. Primer Loader This will load six primers at once, easy to use just place cylinder onto the primers. Bullets retained by a top held on by a magnet. I can supply these either in silver or black for £6.50 each. All the above prices include postage. Norman
  2. To aid my enjoyment of my Alfa I have devised number of reloading aids. They are all designed to speed up the reloading process. Powder Speedloaders. These hold six charges ready so that all six chambers are charged as one, by the cylinder being placed onto the charger and then all being inverted. The lid is held on by a magnet so no powder escapes. I can supply these either in silver or black for £7.60 each or £70 for ten. Powder Speedloader Charging Funnel Just to make it easier to load the charger I also designed a simple charging funnel to avoid powder loss. Supplied free with an order for 10 Powder Speedloaders or as a separate item £5 Bullet Loaders Again to load 6 bullets at a time, slightly more tricky to use as you have to tilt both the Bullet Loader and the fully charged cylinder but it will place all six bullets at the same time. Bullets retained by a top held on by a magnet. I can supply these either in silver or black for £6.50 each or £60 for ten. Primer Loader This will load six primers at once, easy to use just place cylinder onto the primers. Bullets retained by a top held on by a magnet. I can supply these either in silver or black for £6.50 each or £60 for ten. All the above prices include postage. Advertised elsewhere Norman
  3. Just these left Lee Quick Trim Die £10 Long Charging Die £7.50 Lee Rifle Factory Crimp Die £7.50 LE Wilson Case Gauge .303 £25
  4. Update Lee Rifle Pacesetter 3 Die Set With Factory Crimp Die £20 Sold Lee Rifle Collet 2 Die Set £20 Sold Lee Quick Trim Die £10 Long Charging Die £7.50 Lee Rifle Factory Crimp Die £7.50 LE Wilson Case Gauge .303 £25 PPU 303 Cal (.311) FMJ BT 174gr PPU Bullets £17.50 per 100 (400 available) Sold PPU .303 cases once fired, cleaned, and full length resized £20 per 100 (400 available) if collected they will be primed subject to sight of FAC
  5. Hi Mav Ready and waiting for you Norman
  6. Lee Rifle Pacesetter 3 Die Set With Factory Crimp Die £20 Lee Rifle Collet 2 Die Set £20 Lee Quick Trim Die £10 Long Charging Die £7.50 Lee Rifle Factory Crimp Die £7.50 LE Wilson Case Gauge .303 £25 PPU 303 Cal (.311) FMJ BT 174gr PPU Bullets £17.50 per 100 (400 available) PPU .303 cases once fired, cleaned, and full length resized £20 per 100 (400 available) if collected they will be primed subject to sight of FAC
  7. Spare turret head for a RCBS Turret Press £45 posted Norman
  8. It isn't an original Colt, unfortunately. The rifle had an unnamed carry handle scope when I bought it but the reticule was loose and impossible to zero! The one on the rifle now is Vector Optics Streak (Chinese clone) bought from Ant Supplies https://www.ant-supplies.uk/scopes-sights-optics/ar15-carry-handle-scopes.html cheap and chreerful but never the less a very good clear scope. Helston Gunsmiths list a Colt for the purest at £290 http://www.helstongunsmiths.com/default.asp?ID=1095&CB=3%2F28%2F2018+7%3A41%3A31+AM Norman
  9. Bremmer Arms AR15 A2 Calibre .22LR Price: £600 Face to Face or via RFD at your cost Bremmer made AR15 A2 built using original AR15 parts based on the A2 model, including 3xBlack Dog magazines and 3xOriginal 10 round inserts for standard AR 5.56 magazines. The .22 rifle uses the Army M-261 kit and an electronic copy of the Technical Manual is available here http://www.liberatedmanuals.com/TM-9-6920-363-12-and-P.pdf The rifle has recently had the following fitted, new firing pin and spring, new extractor claw and spring and new recoil spring. The old parts and some other replacement parts are included. The beauty of the rifle is that it is built of the same materials using M16 / AR15 forgings / castings, furniture and hardware. The lower can be used with a .223 upper and the .22rf upper uses the M261 conversion kit developed for the US military so they could fire .22 in their .223s for training purposes. This is a fully dedicated .22 A2 milspec rifle, complete with scope I believe 2000 were produced between 1997 and 2000 and this is number 19. Bremmer Arms were started by Paul Leitner-Wise. When Bremmer folded all their stuff was bought by Parker-Hale. When Parker-hale went down the pan, all their stock was bought by Sabre Defense. I have been told that the receivers were made by/for Bushmaster/Quality parts. Norman
×

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy