Bob Valdez Posted December 23, 2009 Report Share Posted December 23, 2009 Here is my Tikka t3 in 22/250 Link to comment Share on other sites More sharing options...
Snowz Posted December 23, 2009 Report Share Posted December 23, 2009 i see the mod and scope have digital camo material on them but whats on the stock, material or pain? Link to comment Share on other sites More sharing options...
Bob Valdez Posted December 23, 2009 Author Report Share Posted December 23, 2009 Duracoat in ACU mirageflage. I will probably do the bipod and scope at a later date. Link to comment Share on other sites More sharing options...
Snowz Posted December 23, 2009 Report Share Posted December 23, 2009 may i ask who done it and how much it cost,and if you like the result, pm if you prefer cheers Richard Link to comment Share on other sites More sharing options...
Bob Valdez Posted December 23, 2009 Author Report Share Posted December 23, 2009 I did it myselt with the kit i bought from Jager Sporting arms (see site ads on here ) Bob Link to comment Share on other sites More sharing options...
Snowz Posted December 23, 2009 Report Share Posted December 23, 2009 i looked at the kits when at the Midlands, looked a good kit, i have even been looking around for a small air compressor to do it with. How did you find the process, the stencils easy to lay out and remove once painted. Might be on the list for the new year then Link to comment Share on other sites More sharing options...
Bob Valdez Posted December 23, 2009 Author Report Share Posted December 23, 2009 Yep just take your time start with the darkest colour first then follow with the lighter ones. Full instructions comes with the kit. When using the stencils MAKE LIGHT COATS do not try to fill them up. I used a small spray gun(HVLP type ) for the first coat then an airbrush for the stencils. Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.