.22LR clearout AR15 / P90 / L85(project)

[Adamdavi3s]

Having a clear out as would like to consolidate my semi autos to one lantac 

AR15

 

TacSol upper with schmisser rail and also the parts to turn it back into a M4 

Timney trigger group 

Catch 22 last round hold open 

Magload safety (I did have to add some tape to the surface of this to get it to operate properly, however original safety also included!) 

Fab grips (might be fakes but do the same job) 

Brass catcher which fits in the rail 

Loads of other upgrades and an tonne of spare and original parts to go with it. 

Various mags incl two 15/22 mags with catch22 spacers 

Falcon 1-8x LPVO scope and mounts (optional) 

Wildcat whisper & cover (optional but let’s be honest, it was built for it) 

This shoots very nicely but I have found it light strikes maybe 1-3 rounds in a mag of 25, usually when it starts to get dirtier. I have only ever run subs in it though and I expect it will cycle 100x better with HV and even a bit of a tweak. There are a few firing pins and springs included so you can tinker! 

£650 for rifle &everything without scope and mod
+£150 for scope and mounts 
+£125 for mod and cover 

I can RFD at cost but this may take a few weeks for me to get down to mine.

Will be listed elsewhere

SOLD P90

I love this, absolutely and entirely… but I am simplifying my semi auto collection down to one Lantac 

I’m not saying it’s the MOST fun you can have with your clothes on but it’s close 

A very stable shooting platform, very easy to knock down a rack of steel at 50m

Will cycle with anything, I’ve run it almost exclusively on SK yellow box (subsonic) 

Ruger 10/22 with unknown upgrades but does have bolt hold open 

HTA 90/22 chassis (rattle can painted) 

Airsoft RIS set 

Fan defence grip set 

Hawke .22 Rimfire scope 

Riflecraft Moderator (must have slot) 

Mags (I think I might even have a couple more somewhere) 

Sold £550 (or knock £30 off if you don’t have a slot for the mod) 

I can RFD at cost but this may take a few weeks for me to get down to mine. 

Will be listed elsewhere

 

L85

It’s a Remington 597 (ruger 10/22 is to fat for the body) with a whole tonne of airsoft parts, some of which are green under the rattle can (one upper and one fore end) 

The trigger box has been modified to run in a bullpup fashion and the direct link is very responsive. 
It also included a couple of 3d printed trigger boxes I was working on to try and get it working with M4 mags with a 3d printed insert, I will include all my files for these. 

Currently it is not together in a working state but it should be easy enough to get there, note the action and barrel meet the legal requirement being more than 24” on their own. 

£200 for the project without the acog or DD rail 
+£75 for DD rail 
+£100 for realfake acog and adjustable rail etc 

Moderator not included 

I can RFD at cost but this may take a few weeks for me to get down to mine.

Will be listed elsewhere

You can see it working from a couple of years ago here:

 

[Adamdavi3s]

Morning

[Adamdavi3s]

@David TS photos of the l85 lower 

[Adamdavi3s]

Hup

[Harley]

Hello I'm interested in the p90 do you have any contact details please?

[Adamdavi3s]

P90 SPF

[Adamdavi3s]

If anyone wants all the L85 bits without the rifle itself then I can post it straight to you 👍

[Adamdavi3s]

@David TS

 

 

 

 

 

some minor fettling around the magwell in one of the lowers to make room for the trigger box