Short Action AICS Viper Skins Folder/Non-Folder and Tikka 590/595 Stock Project Components

[Edinburgh Rifles]

Short Action AICS Viper Skins Folder/Non-Folder and Tikka 590/595 Stock Project Components

Large Square Bolt Cut-Out
Comes with Folding or Non Folding V2 Precision Rear Skins ($59 optional extra to standard)
Standard grip (not shown)


Sides, grip and choice of Rear folding or non-folding skins - £110 posted
V2 Precision Rear skins (whichever one does not sell with the sides) £30 posted

***************************************************************************************************

Also available Tikka 590/595 semi complete conversion kit project components

Components sourced for custom Tikka stock but plan changed!
Solid and tubular Aluminium milled chassis complete with integral versapod fitting (requires finishing for fitment)
Chassis has solid box mag section built in ready to be milled out to accommodate an AI mag and release mechanism, or left as a single



£NOW SOLD

****************************************************************************************************

Less complex, single shot only tube chassis components
Solid and pushfit front and rear tube sections (could be modified to allow M4/AR style adjustable length of pull!)
Aluminium Box Tube chassis mock up

Tube system with 595 action in place




*******
Tube and Solid Square bar components
Four tubes and square bars to right of picture

£30 posted

[Edinburgh Rifles]

Non Folder Skins Sold

 

Folder V2 Rears and Tikka Project stock still available

[Jimcoops]

Non Folder Skins Sold

 

Folder V2 Rears and Tikka Project stock still available[/quote

 

]i am interested I the Tikka chassis

Is it still aavailable

Is it possible to speak,o I would want to use it to fit. RPA quadlite receiver - so need to know extent of mills etc. For the receiver

[Akeld]

What are the dimensions of the box sections please?

[Edinburgh Rifles]

Non Folder Skins Sold

 

Folder V2 Rears and Tikka Project stock still available[/quote

 

]i am interested I the Tikka chassis

Is it still aavailable

Is it possible to speak,o I would want to use it to fit. RPA quadlite receiver - so need to know extent of mills etc. For the receiver

 

Hi Jim

Email sent

[Edinburgh Rifles]

What are the dimensions of the box sections please?

 

Left to Right

OD 1.256" ID 1.006"

OD 1.002" solid

OD 1.002" ID0.747"

OD 0.997" ID 0.741"

 

The main dimensions of the AICS chassis are 1.25" and 1"

The two tubes are a push fit to allow the rear stock and the front stock to be adjustable if built that way

I also have a solid bar 0.749" OD which I had planned to use as a joiner between the butt section and the rear stock section

will throw that in if they all go

[Edinburgh Rifles]

Milled chassis components now sold

 

Tubing and bar components still available

[Edinburgh Rifles]

V2 Precision Rear skins NON FOLDER

Still available