Foxshooter Posted January 8, 2016 Report Share Posted January 8, 2016 I know some of you guys are quite talented machinists... I have one of the annealeze machines that I'm currently running on a canister of MAP gas. What would be really useful is an adaptor with the same male thread as the MAP cylinder with a male spigot on the back that I could fit to a piece of hose I can then attach to my BBQ cylinder via a standard reg. These little cylinders are silly expensive when I have a 25kg propane cylinder just sat here waiting if I only had a means of mating the two systems. I have a couple of spare regs for Propane or Butane and a piece of gas hose from an old BBQ so the rest is easy.... Anyone got any ideas for something off the shelf that would do the job or is proficient with a lathe and a piece of brass... Mark Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.