Cowsmart Posted August 16, 2015 Report Share Posted August 16, 2015 Been given some brass that has 'frontier' on the base, is this brass OK for reloading? It's cleaned OK and can't see any obvious cracks..regards Lee Link to comment Share on other sites More sharing options...
Akeld Posted August 16, 2015 Report Share Posted August 16, 2015 Google throws up a few answers from other forums. Seems it was sold by hornady but not sure who makes it Link to comment Share on other sites More sharing options...
Laurie Posted August 16, 2015 Report Share Posted August 16, 2015 Yes, 'Frontier' used to be what Hornady called its brass, so it's likely a fair few years old. Hornady makes most of its own brass now and headstamps it with its own name, but this was probably made by either Norma or one of the big US ammo companies. The original 'Frontier' brand ammunition goes back a long way to when Hornady was a small outfit. They bought and reconditioned once-fired .30-06 and 308 brass and reloaded it under this name. They later expanded into other cartridges using new made brass supplied by others under contract then finally invested in case drawing machinery to do the job in-house. If the cases are in good nick, they'll be as reloadable as any other make. Link to comment Share on other sites More sharing options...
Cowsmart Posted August 16, 2015 Author Report Share Posted August 16, 2015 Thanks....just resized some and 3 got small indentations on the shoulder, I know its from too much lube, but are they still OK to shoot? Link to comment Share on other sites More sharing options...
Laurie Posted August 16, 2015 Report Share Posted August 16, 2015 Yes. Link to comment Share on other sites More sharing options...
243ack Posted August 16, 2015 Report Share Posted August 16, 2015 Just have a check of the case length, though. I reload a lot of '250' and find it stretches more than any other calibre I work with. Link to comment Share on other sites More sharing options...
Cowsmart Posted August 16, 2015 Author Report Share Posted August 16, 2015 Yeah some were 1.915 after sizing trimmed to 1.905 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.