Jump to content

Tikka M658 .300 Win Mag (RH) - Zeiss - MAE T12 Mod - Brake - Load Data


Recommended Posts

I may regret this but am hankering after something else

Tikka 658 actioned 300 Win Mag (Wood and Blue)
This model action is the precursor to the M695 long action and has an external bolt collar that locks into the receiver and creates an extremely smooth bolt throw
15-17mm integral dovetail with front recoil pin notch
3 shot single stack steel magazine
Very nice factory adjustable trigger - currently set around 1.75-2lb pull

Very nicely figured walnut stock with Rosewood fore-end
Roll over cheek piece nice sized palm swell and Monte Carlo grip- regularly re-oiled and hand rubbed with Phillips Walnut Preparation - Shows usual signs of use, few scratches/little dings/marks in chequering
QR slings studs - front is through bolt version
Upgraded Pachmayer White Line Recoil pad - The tikka pad was horrible!

Sporter profile Barrel Screwcut 14x1 with discreet/smooth thread protector (J Russell)
shows usual signs of reflex moderator blue removal, easily sorted if required
Barrel approx 1-1.5" shorter than OEM due to removal or previous 1/2" thread and recrowning (J Russell)

Rifle only - £625


Also Available

1) 14x1 Custom Muzzle Brake - Timed to vertical on this barrel with no crush washer required - Steel 3 vent 45 deg rear angle, 8mm bore - very effective recoil reducer and "range neighbour annoyer" £55

2) Brand New PES/MAE T12 reflex moderator - rear bush sized for this rifle
Rated and stamped for 300 Weatherby Magnum £165

3) approx 220x 208gr AMax - £90 (Don't even think about asking if I will sell these first! Rifle buyer gets first dibs)

4) Approx 80x 180gr Remington Corelokt and enough Remington Powder to reload (data provided) - £60

4) 100 once fired Norma cases - bought new at £115 from Spud not too long ago, only ever neck sized, higher volume case than most brands (i.e. lower pressure) will last longer than most. - £70 (as above)

5) Approx 2.25lbs of Hodgson H1000 - £80 (as above)

6) New Zeiss Conquest - 4.5-14x50 Z Plex Target Turrets - boxed papers, covers etc - £525 (as above)

7) Tikka OEM Steel 1" medium rings - perfect 0.5mm barrel clearance with this scope/rifle for a excellent cheek weld £28

Will offer combined price for all or some of the above on request
RFD to RFD at buyers cost
Can be viewed in Edinburgh, Borders and depedning on schedule North East/Northumberland, Ayrshire etc

Load data available for:
180gr Lapua Mega
180gr Remington Corelokt
208gr Hornady Amax
All loads for accuracy at moderate MV and Pressure

It shoots very well with IMR and H4831, N160 and latterly H1000 - Significantly under MOA - capable of 0.2 MOA if not less

Initial load testing write up:

http://www.thestalkingdirectory.co.uk/showthread.php/92176-300WM-208gr-AMax-result?highlight=208gr+amax+300wm

 

I shot this 5 shot group with the 208gr Amax about 2 weeks ago at Carfraemill range at 130yds

 

300_zpscq7eschk.png

 

IMG_2578_zpstosakkb8.jpg

 

IMG_2579_zpsw7rhcmwh.jpg

 

IMG_2580_zpsrqm1i55y.jpg

 

 

IMG_2581_zpsuetq4h7v.jpg

 

IMG_2582_zpsmvfavhej.jpg

 

IMG_2583_zpsjyvlwzcx.jpg

 

IMG_2584_zpswnf6jagr.jpg

 

IMG_2585_zpsmjmdrs6x.jpg

 

IMG_2586_zpsk8uxhgsm.jpg

 

 

IMG_2587_zpsi7nisbga.jpg

 

IMG_2588_zpsxogrum7o.jpg

 

IMG_2589_zps20aa4ebf.jpg

 

IMG_2589_zps20aa4ebf.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy