txpete Posted October 28, 2014 Report Share Posted October 28, 2014 I just signed up and thought I'd post a couple pictures of my rig. These are from a club match last month in South Texas. I had the 26" 260 tube on my AIAX. Click for larger AX260 SuB MSR @1000 yards to far steel -Pete in Texas. Link to comment Share on other sites More sharing options...
gunnery Posted October 28, 2014 Report Share Posted October 28, 2014 Hi Pete and welcome what loads are you using in .260 powder,bullets,etc thanks Link to comment Share on other sites More sharing options...
txpete Posted October 28, 2014 Author Report Share Posted October 28, 2014 Hi Pete and welcome what loads are you using in .260 powder,bullets,etc thanks I use 140 AMAX with a conservative 42.4 grains of H4350. Most f the guys I shoot with run it a bit hotter than that but after my ladder test I decided to run it one node lower than max just to make my primer pockets last. It gets pretty hot down here too so I figure erring on the side of lower pressure would be a good thing. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.