sussexsteve Posted August 16, 2014 Report Share Posted August 16, 2014 I have a 6.5x47 blueprinted remi action rifle. Barrel is pacnor match shooting 120g nosler bts. I bought an atec cmm4 stamped 6.5 Should I have gone 30cal ? Atb steve Link to comment Share on other sites More sharing options...
DW58 Posted August 16, 2014 Report Share Posted August 16, 2014 Why - isn't your barrel/thread straight? Link to comment Share on other sites More sharing options...
sussexsteve Posted August 16, 2014 Author Report Share Posted August 16, 2014 I think it comes slightly loose after a couple shots. Off to a reputable gunsmith next week . Just wondered if anyone else had a problem with this moderator. Atb Steve Link to comment Share on other sites More sharing options...
Chris-NZ Posted August 16, 2014 Report Share Posted August 16, 2014 I'd be looking closely at the quality of the threading job before blaming the mod Link to comment Share on other sites More sharing options...
Tony.H Posted August 17, 2014 Report Share Posted August 17, 2014 all my mods have comes loose, they have on all my guns and all differnt mods after the first few shots, so now i really tighten it up, just that little bit more pressure at the end... ive an ase utra sl5 and when i fist shot my new barrel i noticed the same thing but both mod and threads are bang on i just make sure i nip it up now..with my hand, not had problems since Link to comment Share on other sites More sharing options...
Murph Posted August 17, 2014 Report Share Posted August 17, 2014 I have a 6.5x47 blueprinted remi action rifle. Barrel is pacnor match shooting 120g nosler bts. I bought an atec cmm4 stamped 6.5 Should I have gone 30cal ? Atb steve My atec used to do the same after say 10-15 shots. At 600 yards on targets once one of the bullets dropped about an extra 4 inches I knew the moderator had loosened slightly. Link to comment Share on other sites More sharing options...
sussexsteve Posted August 23, 2014 Author Report Share Posted August 23, 2014 Cheers lads Rifles now been rethreaded recrowned by steve kershaw and new pes moderator fitted . Now shooting hole in hole with 120 nosler bts. Ps steve had nothing to do with the original build but did pride a very quick turnaround and excellent workmanship. Atb Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.