leebut Posted March 6, 2014 Report Share Posted March 6, 2014 Hi Guys Just bought myself a M84 for a bit of long range target shooting at Diggle and Altcar, its came with a weaver rail and very high mounts which don't look very good even when you fit a 56mm scope im looking for a set of bases to suit this rifle its come pre drilled and tapped for bases the top of the receiver are flat and the rear mounting platform is lower that the front regards Lee Link to comment Share on other sites More sharing options...
remington700links Posted March 7, 2014 Report Share Posted March 7, 2014 Try Norman Clarke,didn't he buy all Parker Hale stock up when they ceased production. Link to comment Share on other sites More sharing options...
Jagged 77 Posted March 7, 2014 Report Share Posted March 7, 2014 I got a rail to suit my old TX1200 from EGW gun works in the US, it was the same as a Mauser if I recall. Link to comment Share on other sites More sharing options...
skany Posted March 7, 2014 Report Share Posted March 7, 2014 Hi I got some rail section from midway and took it to a engineers for mine! When i first got mine i used the normal curved mauser base with the bottom milled off to make them flat! it made them a bit flimsy hence i upgraded to the rail cheers Andy Link to comment Share on other sites More sharing options...
leebut Posted March 9, 2014 Author Report Share Posted March 9, 2014 cheers for the info guys lee Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.