cmsds Posted December 9, 2013 Report Share Posted December 9, 2013 hi anyone having a similar problem with there scope, when I zero the scope I can get matching bullet strike which is great, however once I switch the scope off and turn it back it loses zero so much so that it moves at least 8 inches high and 2 inches to the left now I no why I missed a fox the other night would gladly like any comments Link to comment Share on other sites More sharing options...
sharps4065 Posted December 9, 2013 Report Share Posted December 9, 2013 I think you may have made the same mistake as I did the first time I zero'd it. Couldn't work out why, once I switched it off, the zero went to hell. Make sure that when you have adjusted the x & y that you switch out of the adjustment mode on the side control BEFORE switching off. Clive Link to comment Share on other sites More sharing options...
achosenman Posted December 9, 2013 Report Share Posted December 9, 2013 I think you may have made the same mistake as I did the first time I zero'd it. Couldn't work out why, once I switched it off, the zero went to hell. Make sure that when you have adjusted the x & y that you switch out of the adjustment mode on the side control BEFORE switching off. Clive +1 yep it's a computer, you must save your settings by exiting the zero mode. ATB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.