Devil_bri Posted April 12, 2013 Report Share Posted April 12, 2013 can anyone tell me the thread on the AI AW 308 muzzle brake with the threaded end to allow the fitting of a tactical surppressor ? i know its a left hand thread i need to know as i am going to order an ASE Utra SL5 moderator cheers Link to comment Share on other sites More sharing options...
LONG RANGE CAPT Posted April 12, 2013 Report Share Posted April 12, 2013 Don't bother, I've had 6 AI's over the years in various calibers and now have a .338 AW & 6.5x47 AW Now I only use the muzzle breaks as thread protectors and don't fit the moderators to the tactical reverse thread. Just order the moderator with a M18x1.5 thread with enough shroud to cover the spigot. Regards Rob Link to comment Share on other sites More sharing options...
Offroad Gary Posted April 13, 2013 Report Share Posted April 13, 2013 I've got an sl5 on my AI AE .308, works a treat. Thread is 18/1.5 and it doesn't quite cover the spigot, I've used a o ring to fill the gap. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.