Tikka Posted January 23, 2008 Report Share Posted January 23, 2008 Does anyone use the Hornady (used to be Stoney Point) OAL gauge? If so, have you ever managed to 'make' a modified case for this gauge? I want to modify a 6.5x47 case to be used with this gauge, as Hornady don't do them. The problem is the thread is a real strange one, as far as I can tell it's a 5/16" x 36TPI or 8 x 0.7 mm. Both are oddball threads and no-one has a standard tap anywhere near these threads. Does anyone have any ideas? Link to comment Share on other sites More sharing options...
6mmBR Posted January 23, 2008 Report Share Posted January 23, 2008 They do do a modified case as I have one for my 6.5x47 lapua. I got mine from Sinclair International. Cheers Dave Link to comment Share on other sites More sharing options...
col48 Posted January 23, 2008 Report Share Posted January 23, 2008 This forum is bloody great ! Thanks for that Dave. hey tikka send me your case and i will sort it out for you.i have the bits and bobs for the job pm me for my address to send the case to you will need a once fired case that has not been resized,unless you have a expander mandrel. ATB Colin Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.