MakeSureAll Posted July 18, 2011 Report Share Posted July 18, 2011 Have just completed one the last mods on my Sig 522! The 2 stage trigger pull on an out of the box 522 goes on for a fair bit, is difficult to tell when the break comes in with the 2nd stage (and is reasonably heavy at about 7lbs). I've tried the AR Hammer spring Mod (link below) but the spring just wasnt man enough for the job, so instead I used some high tensile steel wire, and bobs your uncle, a very nice 2 stage trigger with a pull of about 3 lbs! Once installed, it needed a bit of adjustment on the leg of the spring, but after 5 mins I found the correct tension for the 2 stage trigger. Well worth doing! (Gunsgobang, thanks for the info and link!) http://www.ar15.com/forums/t_6_45/302189_index.html Rick "Arte et Marte" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.