Nelly Posted July 13, 2011 Report Share Posted July 13, 2011 Hello All, New to re-loading with a question. If my case length varies and I seat the bullet to achieve a OAL of 2.800 will there be different measurements between one loaded case and another ? Example two cases sized and within SAMMI spec. One case is 2.007 and the other is 2.009 will this give an OAL difference of 0.002 or will the bullet seat deeper ? I hope I've explained it clearly. Thanks Link to comment Share on other sites More sharing options...
Nelly Posted July 13, 2011 Author Report Share Posted July 13, 2011 Evening Ronny. Thanks for the quick reply. I've got the Lee Cutter but the cases are shorter, the Lee doesn't trim them. I've also got one of the Hornady gauges so I'll get onto it tomorrow. Thanks again,top bloke. Link to comment Share on other sites More sharing options...
Guest richness Posted July 13, 2011 Report Share Posted July 13, 2011 Evening Ronny. Thanks for the quick reply. I've got the Lee Cutter but the cases are shorter, the Lee doesn't trim them. I've also got one of the Hornady gauges so I'll get onto it tomorrow. Thanks again,top bloke. If you've got the Hornady comparator thingy, you're cooking with gas mate. It's the most important thing in my reloading room bar none. Link to comment Share on other sites More sharing options...
Nelly Posted July 14, 2011 Author Report Share Posted July 14, 2011 Thanks to everyone. Ronny, you have a PM. Also thanks to Spud. Good vid, found some other useful info too. Nice work fellas Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.