weejohn

Is there any chance you could post a link to the exact cykepod you have please ? 

I actually quite fancy this but doubt my wee 6x47 lapua and 80gr bullets would manage 😄

Dolphin chassis for Remington long action complete with Wyatt's bottom metal and magazine. 

£600 posted ono 

Mcmillan A5 stock for Remington short action complete with HS precision bottom metal. 

£650 posted ono

Yes I use one .

Great test .

I could have sent you the ludicrous lumens wraith to test alongside the others 👍

2 hours ago, garyw said:

shame its got to go but needs must-and if it was a RG action i would snap your arm off for it as would a few others,good luck with the sale.

I actually think I have the only RG action in right bolt left port repeater configuration he has made .  

I can't believe this hasn't sold yet , especially at that bargain price !!

The only ones I havnt tried are the pbir models . 

The dfk I had was ok but build quality was not great . 

Hopefully someone will chip in with the dragonfly upgrade as I havnt heard of it before . 

I have no experience of the vscel upgrade but the dragonfly I had was a terribly dirty picture and sold it on . 

Currently using the 3x wraith from LL which is by far the best IR I have used so far . 

Closest second was the standard Sirius xtl. 

Like you I have went through a few IR's and now on my 7th.  

What NV are you using it with ? 

😆

On 8/18/2022 at 10:25 AM, Mav61 said:

If only you were closer I'd take all 4000 from you!

If lever357 was anywhere near rothbury and you were anywhere near Kilmarnock/dalrymple I could play middle man and deliver them up to you ? 

Do you have any picsof the f16?

Only £12 👍

1 minute ago, gazzarM1 said:

Listening with interest…are they available from tier one?

Yes they are , i have 34mm and 30mm scopes so always buy 34mm scope rings and buy the inserts to make the rings way more versatile/saleable 

You should mention that reducers are available for these if you want to use them for a 30mm tube 👍 

I do like interrupted fluting 

When i look at getting a new set of mounts i always just go straight to tier one , especially now the do accessory rails to fit on top and 45 degrees.  

Its made by ludicrous lumens , i can actually go all the way to 50x mag on my fox target @ 230 yards . 

https://www.ludicrous-lumens.co.uk/VULPINE_MK3_ULTRA_SHORT_HIGH_PERFORMANCE_NEAR_EYE_ADD_ON_70mm-78mm/p6841183_20219414.aspx

44 minutes ago, Scotch_egg said:

I have a March Scope and want to know if any one has tried the pard behind one. 
 

 

Not a pard but a vulpine mk3 .

Slightly dodgy just using my phone but hopefully you get the idea . 

There are 4 or 5 videos on my channel .  Mag was 15x and backed it off to 7x , the stump is 200 yards . Other vids shows a badger that appeared , a badger at 400 yards or so (cant quite remember) and a sheep at 500 yards . Unfortunately it looks like i may need to now sell the atn 4k to put towards another March 🤦‍♂️

14 hours ago, Elwood said:

There's a couple of guys on the NV forums that have done quite an extensive test on various scopes using the pard 007, it has yet to be published but hopefully it will soon.

Everything I have read seems to suggest the Hawke, MTC , Delta and Falcon range of scopes give the best performance. I have recently tried my 007 on a Nikon Fiieldmaster with OK but not great results.

Interesting someone also put a video up using a March 5-50x56 with a different digital add on and the result were amazing. 

I look forward to what you find out and please post the results on here.

Was that me Elwood? 

I am not a FFP scope person and i always go for a minimal crosshair but you should have a good look at march scopes , they are pretty small and light and have a huge range of various reticles. 

I have always wondered about the original 5x drone , can the doubler be fitted without any change in point of impact or does it need re-zeroed once fitted ? 

The reason i wondered is i shoot 2 different types of land , one is quite open hill where a lot of shots can be 200 yards + and the other can be anything up to 150 yards so both the 5x and 10x would be ideal . 

Nice to see someone else uses a rifle with the correct bolt/port configuration.