Gunny bedford

my club shoots exclusively at Hythe and Lydd, all bookings have been cancelled for the forseeable by the MOD, we've only managed one shoot in recent months, our booking for October was cancelled in the last few days...

hi is the lyman case trimmer still for sale ??? if so please PM what you want for it

thanks

Neil

If you are still looking for a club i can suggest one, it shoots at Hythe and Lydd military ranges, obviously at the minute a bit curtailed in activity ! but we are hoping the MOD will allow shooting for civilian clubs again soon, it also meets once a month for  a clay bash, message me if you want details.

cheers Neil

thanks will give that a go !

So i have managed to snap an end of one of the sunshades for my Cadwell chrono - before anyone asks ... No i did not shoot it !! I managed to drop the bag and the end snapped off ! annoyingly its where the small metal pole goes to attach to the body of the chrono. I had a look on line for spares, but all i could seem to find is the shades with the lighting kit as well, which is not really what i want, i just want the basic one to replace the broken shade !! anyone know where i can just get basic replacement cadwell shades ?

Ive also tried to glue the end on, used two "super glues" to no avail, as soon as you put a bit of pressure on it, as it would be when under tension having the metal pole in it and attached to the chrono  the join breaks again, I am assuming perhaps somebody has done similar in the past ? any tips on decent bonding material that could keep the thing together !!

cheers

Neil

On 2/16/2020 at 11:40 PM, geek said:

I am using Vihtavuori N140 (25grs)  in my Remington 700 (.223) with Lapua bullets (69gr), this equates to 2811 ft/s. It seems a very accurate load. Load works fine in my rifle, unsure about others.

https://www.vihtavuori.com/reloading-data/rifle-reloading/?cartridge=7

 

 

I use 24.5gr  N140 using 69gr Sierra tipped match kings out of my Ruger Predator, happy with results sub MOA at 100 meters, also good fox load !

Hi

should be getting some Nosler 165gr ballistic tip bullets in .308 soon, looking to load with N140, will be shooting out of a Gen 1 Ruger precession, 20" barrel, 1 in 10 twist, anyone loaded similar ? thinking of starting around 39.5gr and working up in .5 to around 43, according to Nosler data 42.5 was the most accurate when tested with N140

thanks Neil

Thanks

5/8 -18 UNF and 5/8 - 24 UNEF is there a difference ? looking to buy a moderator for my .308 it used to have a muzzle brake that had a 5/8 - 24  UNEF bushing on it to fit onto the threaded barrel, if i get a mod with 5/8 18 UNF will it fit my thread ?

thanks

Neil

CZ make both bolt action and semi auto in .22 WMR, not sure if you can get in left hand mind you

2 hours ago, Kipper said:

I worked up a load for a pals ..

Hes running

45.5gr N140

Fed 210m

Norma case

Lapua 155 scenars 

 

thanks will keep that recipe in mind

Thanks chaps, i dont intend to shoot fox with the .308,  my FAC is open  for .223, .22WMR and S1shotgun  for all quarry, but currently the .308 is only for range work, but i have been offered 2 permissions lately with deer and boar on, so might employ the .308 for that,  as i dont really have the room for another rifle ! primarily its my range gun down at Hythe and Lydd ranges. But i am not sure if i can use the .308 for quarry, i live in Kent and somebody stated Kent were not keen on people using .308 for hunting over land ? i will enquire to see if i can get that caliber on my open ticket as well, if not will still hand load for the ranges, and have a hard decision on what rifle to replace with a .243 ! LOL

Hi

will be looking to get some Lee .308 dies soon to start home loading this caliber,at present just doing .223. I am using N140 for my .223 and my cunning plan was to use this as well for .308. Has anyone got any recommendations for N140 in a Ruger Precision ? with what bullet ? i am using tipped match kings for my .223 and liking them very much (use both for range and foxing) so was perhaps considering them for the .308 as well ?

cheers

Neil

looking at the magpul site, this would appear to solve the problem !!

https://magpul.com/firearm-accessories/pmags/pmag105-56ac.html

looks like its not quite out yet, but the blurb said it has been made to address the feeding issue with the hunter stock and .223 , best start saving my penny's !!

https://www.blackrifle.co.uk/Magpul-Hunter-American-Stock-Ruger-American-p/mag931.htm

above sells it, but appears out of stock at present, however like i  said , i think they will no work with a .223 predator for some reason, which is fairly annoying !

it it helps at all 69gr tipped match kings shoot really well out of my .223 ruger predator. It has 1 in 8 twist, i am loading 24.5 gr N140, get sub MOA 5 round groups at 100 meters,  cheers Neil

Hi

I am pondering if i should upgrade the stock on my Ruger American  predator .223 . I read an article  on thames valley guns where he upraded his .308 predator using the Magpul hunter stock, he reported a significant gain in accuracy, I am quite happy with the current accuracy of mine, sub MOA (just) at 100 meters, using home loads 24.5gr N140 with 69 gr Sierra Tipped Match kings, but was wondering if i could squeeze a little more out of it, plus it woudl be nice to have a more adjustable stock.

However not sure what stock would be suitable ? it would appear that the Magpul stock is not suitable for a .223 rifle ? also looked at boyds but was not sure what would be suitable. So has anyone upgraded a .223 predator ? if so using what stock. Thanks Neil

Have you looked at the new VSCEL lasers that come in 940? i use on for my spotter, the thinking behind that being i use the spotter the most when hunting, scanning around looking for a target, so i want that to be the most "invisible" i have a 850 laser for the rifle, but only turn that one when i am about to take a shot. have a look at night vision store black sun dark engine covert IR, this is the one i use, they claim you can still get 300 yards with it, which in my experience is about correct

http://www.nightvisionstore.co.uk/black-sun-dark-engine-covert-ir-illuminator-c2x28497639

On 9/28/2019 at 7:43 PM, 22cf said:

I wanted one rifle for Long Range varminting and foxing so I bought an 8twist Tikka T3x Super Varmint in .223rem which is perfect for the jobs required with either 53gn VMax or 77gn Tipped matchkings.

sorry to change course a bit, how are you finding the 77gr TMK's ? ive started to load .223 with the 69gr, and out of my ruger predator (also 8 twist) i am getting just under MOA at 100 meters, so fine for hunting, but was wondering if the 77gr might be better ?

Hi PM sent re spitifire

thanks

Neil