lapua

I use a torch

I use a 6x42 schmidt

£100 delivered as it is.

The noise in the video is a Pug snoring and not the watch.

As pictures, needs battery, still running but second hand skipping 5 seconds which signifies battery is low. Relatively new strap, some minor scratches see pictures. £150 as it is or £200 posted via GWS for a thorough service and battery replacement/pressure test. 
 

comes with boxes, tags, paperwork etc
 

stainless yes, but not rust proof!

Get a decent rifle builder to inlet a flat top blank stock for you

https://g-line.net
 

adaptor and plate for iphone 6. Boxed, as new, £50 posted

GBPRA badges are out, apparently #001 is going to be available soon when Tiff gets his collar felt 😂 #nofacnorfd

On 5/16/2021 at 9:21 AM, markymark said:

It does sit quite a bit lower compared to standard. Most people who’ve shot it have noticed a positive difference. 
 

The take home message for most I would imagine would be.... would I sell my existing AI to get an AT-X. No. If I didn’t own one, but wanted one.... would I choose the AT-X over others, quite possibly. 
 

 

or just add a hammer rail to your AX, that gets your arca as close to the bore line.. its definitely a move in the right direction for AI and definitely better than the chunky arca rails that are being offered as retro fit

I don’t undeestand the comments about the barrel and action being lower in the chassis? The distance between the c/l of bore and the underside of the arca rail doesn’t look any less than other chassis’ provide. Or are they comparing it to older AI’s?? Does this really matter when you rest it on a big fat bag anyway? Care to explain please? Or is the shoulder/recoil pad just higher?

Thats £55, not £50 or £45.

For sale at £55

16 hours ago, Treedave said:

I’ve been using ARC mags for 6.5 CM and 7-08. Only issues I’ve had are long rounds getting pushed forward and tips dragging on the mag wall. A simple nudge back with a finger and feeding resumes. Sourced from Paddy Dane in the UK.

https://www.americanrifle.com/shop/product/arc-mag-arc-mag-10-round-7-62x51-308-win-8?category=4

 

Be careful with these mags, my borden alpine feed ramp protruded over the mag edge and the tips got caught. That was in an AICS AX and using tier one bottom metal. Standard AICS with the spacer work 100% fine

Bump

22 hours ago, rsc1960 said:

Well we have to keep trying,

 

really can’t understand why its not sold ?

 

anyway i have plenty of time,

 

bob.

i can remember you trying to sell that 20 tac for years - seems its a buyers market as always. good luck with the sale

Try their customer services dept, speak to Jake on +447557519992

3 hours ago, Popsbengo said:

250C and disassemble hot.  That temperature won't adversely affect the barrel either

Its not on the barrel

14 hours ago, pengo said:

How are you getting on with your brake? Is it still "locked" in place?
Cheers.

Paul

Yep, its now set up for that rifle and goes on and off perfectly and 100% repeatable. Stuck 100 rounds down it with the RMPRA last week, no problems. Rifle now cleaned and ready  for next outing, brake will go back on 100% the same.

dont know if i’ll ever get to be able to adjust it again, i guess that will be the problem of the next rebareller, whoever that may be....

Just fitted a brand new spring and follower to this so effectively brand new now apart from some minor marks

I’ll take 200, pm me details please

Sold 

9 hours ago, No i deer said:

Patience is virtue 😉

No- supplying what was ordered , on time, and without lieing to or ignoring your customer is a virtue. Still, we got there in the end. Nice bipod, shame about the wait and the missed opportunities to use it.

Bits finally received. 

1 hour ago, No i deer said:

I bought rings from him that were too high..

He sent me another set

I re-advertised them and sold them then transferred the money back too him rather than waste money on postage returning them.

He'll be in touch 👍

He needs to deliver!!!