Xtrema
-
Posts
210 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by Xtrema
-
-
-
Do you mind me asking why it wasn't for you?
-
On 7/25/2021 at 11:44 PM, Richiew said:
Yep that’s the website . Not cheap but very well made . They fit perfectly and allow a longer coal . I’ve got both the 6 and 10 sizes and they are what they claim and work perfect. The standard tikka five rounds mag work best with 4 rounds . T hi e WR MAGS work great with the specified 10 or 6 rounds. Spot on
Do these mags wobble about like the standard T3X mags?
-
-
Typo in your title. You have a 2 4.5-27x56.
It's a fine scope by the way; i have one. Quite heavy though and for some inexplicable reason not the easiest of scopes to sell.
-
On 4/23/2021 at 10:29 PM, rsc1960 said:
May i offer a spare set of strikers, to the new owner,FOC
purchased for my own 725 thats now sold and just sat amongst the other bits in the old gun room,
bob.
You may indeed.
-
-
5 hours ago, Phillywilly72 said:
What is the LOP to the end of the wood not the pad? Thanks
The only info i can find is a LOP of 14 3/4".
The Length of pull can be altered by changing the Inflex II pad or by inserting spacers, which are available separately.
-
I bought this shotgun from new 2 years ago and i have only been out with it twice. Consequently this gun is in as new condition, unmarked and showing no signs of use.
As this gun is a cabinet queen and taking up space, it needs to go to make room for a new project i have in mind.
Just 3 boxes of cartridges have been through this gun from new.
Browning plastic case is included with a full set of chokes, alternate trigger and the kit for auto safety (not fitted).
Photographs were taken in bright sunlight making the wood look a lot paler than it actually is.
£2000
Advertised elsewhere.
-
For what it's worth, i've been using CCi 400 primers for many years without a single mishap.
-
I guess i was lucky getting a target at Short Siberia yesterday afternoon then.
-
Is that a Picatinny rail on the fore end?
-
On close examination they definitely are stitched in.
I wish I'd known that before i bought it as one of the swivels won't screw down and lock properly.
-
Does anyone know if the sling swivels on the Roetex Hunter Pro sling are removable?
It looks to me as if they are effectively stitched into the straps which seems a bit silly. -
Here you go.
Cartridge : 7 x 64 Brenneke
Bullet : .284, 139, Hornady GMX 28270
Useable Case Capaci: 59.704 grain H2O = 3.877 cm³
Cartridge O.A.L. L6: 3.307 inch = 84.00 mm
Barrel Length : 24.0 inch = 609.6 mm
Powder : Vihtavuori N160 *CPredicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms-20.0 79 41.92 2131 1402 23508 6826 78.6 1.669
-18.0 81 42.97 2184 1472 24934 7083 80.0 1.630
-16.0 83 44.02 2236 1544 26447 7339 81.4 1.592
-14.0 85 45.06 2289 1618 28056 7594 82.7 1.556
-12.0 87 46.11 2343 1694 29763 7847 84.0 1.519
-10.0 89 47.16 2397 1773 31577 8097 85.3 1.484
-08.0 91 48.21 2451 1854 33507 8343 86.5 1.450
-06.0 93 49.26 2505 1937 35557 8585 87.7 1.416
-04.0 95 50.30 2560 2022 37740 8822 88.9 1.384
-02.0 97 51.35 2615 2110 40065 9053 90.0 1.346
+00.0 99 52.40 2670 2200 42541 9278 91.0 1.309
+02.0 101 53.45 2725 2292 45183 9496 92.0 1.273
+04.0 103 54.50 2781 2386 48001 9706 93.0 1.238
+06.0 105 55.54 2836 2483 51012 9907 93.9 1.204
+08.0 107 56.59 2892 2581 54231 10099 94.8 1.171 ! Near Maximum !
+10.0 109 57.64 2948 2682 57658 10280 95.5 1.139 ! Near Maximum !Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 99 52.40 2824 2462 50602 9634 96.8 1.211
Data for burning rate decreased by 10% relative to nominal value:
-Ba 99 52.40 2484 1904 35140 8553 82.3 1.421 -
I should imagine they are easily lost, though i believe the idea is to take it off when not in use.
I do like the fitting options though. I also like the pan function and the ability to have it fixed if necessary.
It's an interesting design.
-
Does anyone have any experience of these bipods?
They look quite good. Quite pricey though for what they are.
-
I picked up my new Tikka T3X CTR in 223 yesterday.
I was shocked at how wobbly ,the magazine fits to the action. I can't pull it out but it wobbles from side to side a lot and even front to rear.
I have seen seen a couple of 'fixes' on YouTube but reluctant to try it on e new rifle. It appears to be a common issue apparently.
-
I have tried a few auto tricklers, I use one just as a thrower these days and trickle to weight with the Target Master and beam scale, excellent piece of kit.
Message 1066 (he makes them) on here for more info.
-
14 hours ago, Tuck said:
The tikka Rifle you have mentioned on this thread. Used to be mine, it’s on a 595 action bedded into a Macmillan stock. And the current owner has had it Coated. It’s not tatty it’s a used rifle, and I can’t believe you’d consider a factory Remington over a semi custom Tikka.. 😱
Apologies. I didn't have my glasses on when i looked at the pictures; which, to be fair, aren't the clearest. The stock coating is not the nicest I've seen.
The only issue i have with that rifle is that it's single shot.
-
2 hours ago, rimmie said:
There is a used rem 700 on guntrader for £445 !!!!!!!!!!
That one has already been discussed.
-
There's a Remington on Guntrader.
-
9 minutes ago, Matt Simmons said:
I could cope with single shot but I would want left hand loading right hand bolt , your back to mad money on a novelty cartridge ..
I dunno what to do now.
It looks like your only option is a full custom.
-
1 in 12 twist i believe?
Atlas bipod super cal BT72-LW17 *SOLD*
in For Sale (Free Adverts for Private Secondhand Items only)
Posted
Ah i see it now, next to the image.