Blue Haze

SFS 

It's effects are absolutely unquestionable - it will cause etching and pitting of the crown and bore. 

If that matters really depends on the rifle,  it's value and what you expect of it.  

I've not seen many old .22lrs that you don't see deep pitting in with a bore scope.

Also open to offers without the red dot and scope mount if preferred.

On 4/23/2022 at 8:20 PM, One on top of two said:

Your not wrong 😑 

You may both be correct,  but hopefully someone will get a gem! 

Slight reduction after a sale fell through 🙂

On 4/17/2022 at 6:30 PM, Catch-22 said:

Tasty…if only I had a .22LR on my ticket. Good luck 👍

Thank you - I'll help you with the variation paperwork... 😁

For sale we have a very rare beast indeed - one of the very few BAR-22 rifles made by Mark Bradley. It is also unique amongst BAR-22s and other CMMG based .22 ARs in several ways.
This rifle package is ideal for someone who wants to get into mini-rifle where it has been used for the last few years. It is comp ready less a LVPO. Every switch, pin and fitting is top of the line and tweaked to run smoothly. 

Key Specs

• Bradley Arms BAR-22
• 12.5" Walther barrel - CARBON FIBER TENSIONED BARREL, incredibly light!
• 10" Bradley Arms (Samson) handguard
• No barrel collar - this is machined into the barrel blank
• CMMG bolt group
• Velocity 3 lb single stage trigger, or Elftman Match for an additional £100
• CTR Stock
• Radian charging handle
• A2 Flash hider and hand grip
• Strike industries strike switch safety - ambi.
• Better mag adapter - to use 15/22 mags with last round hold open
• Bolt group and frame polished to run with minimal oil
• Tensioning nylon tipped grub screw in lower to remove all 'ar wobble' 
• Cerakoted in Midnight Bronze and Tungsten 

Included Extras

• Vortex 30mm tube scope mount (NO SCOPE)
• 45 degree offset red dot mount
• RMR type red-dot sight, zero'ed at 10m
• Magload magwell 
• 1x 15-22 mag in matching cerakote 
• Cerakote into a colour of your choice for £150 if you buy the rifle and don't like the colour

Price

£1350 for complete rifle as pictured less the scope with Velocity Trigger 
£1450 with an Elftman Match trigger instead
£475 for Vortex 1-8x24 strike eagle in matching cerakote finish 

You would be welcome to see the rifle test fired on collection, or try it out yourself at Silverstone Shooting Centre as a guest. 

Rifle is ready to go in the MK18 area. 

Contact 
ZERO-789167928-NINE
stevejdurrantATgmail.com

On 11/24/2020 at 9:23 PM, Catch-22 said:

Beautiful rifle & kit - looks lovingly maintained. That will be a real treat for someone.

Have a bump! Good luck with your sale 👍

I appreciate the comments - and of course I hope the next owner is a happy with it as I've been!

11 hours ago, rangerunner said:

Morning, P.m’d you re the dies.

Thanks

Thanks Rangerunner.

Dies sold and will arrive Friday. Thanks for the interest. 

3 minutes ago, 0284 said:

Are you not selling the scope Steve?

I'm afraid the scope has already been sold last week through word of mouth, along with the rings. It'll be back on the GBFCA lines with its new owner next year 😊

Reluctantly I offer for sale a ready to go f-open rig including all the trimmings if needed. After a change of work, I have been unable to find the time to give the sport the dedication it demands at the higher levels. As such, almost everything below is offered in mint or nearly new condition: 

Photos - A ton of photos of all the blow are here:

https://1drv.ms/u/s!Ah_UQJpiBIAegrwcyK6ZVTzkevIt_g?e=h9uHP1

Location - Buckingham, MK18. 

Contact - Preferably by phone/text rather than PM. 0789 'one' 679289

Dolphin Build .284" WIN F-Open Rifle (scope not included)
£3000

Action

• Barnard PC action 2000 rounds fired total to date. Action was new in 2016 with 16 proof marks.
• Right bolt, left port. 
• Dolphin extended bolt handle.  
• Dolphin 20 MOA rail bedded to action top and finished without overhang.
• Barnard lightweight trigger 

Barrel

• 40 rounds from new. Re-barreled at the end of 2018 for the 2019 season. 2018 proof marks.  Run in and zero checked only. (that I then didn't shoot).
• Bartlein 5C
• .284" WIN with .318" neck
• 1 - 8.5" twist rate.
• Full 34" finish length.
• Straight taper from 1.25" @ action to 1" at muzzle.
• Threaded with M18 x 1 muzzle thread + invisible thread protector.
• Brushed finish 
• (Moderator available to suit if required) 

Stock

• Joe West laminated open stock
• Blue/grey laminate (blue is very much 'royal blue, though it looks more purple in the photos)
• Dolphin bedding block (fully machined rather than v-block) so no water issues etc. 
• Adjustable cheek piece.
• Dolphin 4-way adjustable but plate and pad
• Polished hardware

This rifle really is 'as new' and ready to go. I have simply not been able to compete in GBFCA time wise for the last 2 years so its time to move it on to someone who will use it. 

Rest & Bag

£1000

• Seb Neo -2nd gen/current model.
• New 2017.
• Rebuilt bearings and polished after last use - mint.
• 3 part front bag with 3M slick material.
• Potektor rear bag with 3M slick ears, filled with heavy sand.

Reloading/cases/ammo

• Redding Type S Comp. die set with comp seating stem and .314" bushing £200 SOLD
• 200 norma cases. Roughly 70 are loaded rounds. All 4 firings and annealed after each firing. All neck turned to provide a .3155 loaded neck. Some spare bullets and powder included if bought with rifle £200
• Presses, tumblers available by request. 

Accessory kit 

£100

•  42" carbon cleaning rod
• Shooting shed machined more guide
• Jag/bronze brush/nylon brush/patches set
• Selection of allen keys for rifle & trigger
• 6Nm torque stick for action bolts
• Action/lug cleaning rod
• Range of cleaners, grease/oil 
• Jag organiser box

Drag Bag

£100

•  60" AIM drag bag in green
• Fleece bag liner

Thanks for looking, and feel free to give me a call if you want all or any of the above, or any other F-Class related things. 

It would be interesting to see how the owner of a wildcat cartridge would be able to stay within the letter of the law here!

On 5/17/2019 at 9:01 AM, gruntus said:

Thanks Edi, Looks like two coats of clear kiwi it is then!!! 👍

Just to confirm, 1 X  application of clear kiwi, a buff off and then a second application without polishing the second layer?

I know I'm making this harder than it probably need to be, I just don't want to c**k it up or permanently fix it to the action! 😉 😁

ATB

G

No, 1 coat and leave to dry. 2nd coat over the top allow to dry - then apply your bedding. 

On 4/2/2019 at 7:06 PM, gunner said:

Its on private land / estate - no town houses etc and soon to be shooting grounds with owners permission , so think i shouldn't need any license what so ever . 

Just be careful what you publicise  - even on totally private land you need a CAA licence and insurance to charge any type of fee for flying a drone/filming etc, no exceptions. 

As above - Pete from Black Rifle. It may not be on his site (it may be) but he has a number of bits in the shop that are not online - just call them. 

What bad things have you heard? Genuine question...

Mik is guilty of several sins, but making bad kit, not evolving designs based on feedback or poor customer service are not among them. Buy with confidence. 

You may struggle at that price as it's more than a new Sebed Neo...