shooter83

Nope. That is the going rate 

Have about 800 I think. £15 per hundred. Picked up 

Still here and at a decent saving

After £108 posted thanks 

Please note. This is not the full rail version. It is without the rail on top

59 minutes ago, Deserttech Europe said:

Do you ever get to Bisley?

Just drive up there and get some sea air whilst you're up there 😉

21 minutes ago, shooter83 said:

I'm using a rcbs charge master. Getting good consistent results with rs50 with me .308. use the same scales for all me other cartridges that I have reloaded. The magneto speed was used to load develop for the .308 with both rs50 and n140 at the same time. Never had an issue. I did think it was quite fast at that powder charge. 

I went with someone else's recommendations on power charge for same powder and bullet. They are using 86grains and getting 3000fps plus 

In any case when it comes to shooting. Whate ever works. Every rifle setup is going to be different. Each to their own.. the fella asked a question. I was happy to share my info as others did theirs. Which I used when load developing. Thanks for your questions Mr popsbengo. Good luck  

13 minutes ago, Popsbengo said:

Just used Geoffrey Kolbe's ballistic app;   guess what - 2768fps with the same data inputted.

I suppose he could just be wrong to ?

I'd take your load data with a pinch of salt unless someone else has similar performance to report.  If it were me, I'd check the calibration of my scales.

 

I'm using a rcbs charge master. Getting good consistent results with rs50 with me .308. use the same scales for all me other cartridges that I have reloaded. The magneto speed was used to load develop for the .308 with both rs50 and n140. Never had an issue. I did think it was quite fast at that powder charge. 

I went with someone else's recommendations on power charge for same powder and bullet. They are using 86grains and getting 3000fps plus 

It's not a typo..I found quickload to be way off. Dangerously off i'm. glad I went with user recommendations and started at about 82 grains and worked my way up. The highest I went up was 86grains and got stiff bolt lift. The speeds are measured using a magneto speed. I can assure you it's not a typo. I wouldn't rely on quickload. Hence why I always ask people what their loads are and how they are performing. Quickload is way off with rs powders. With vihit it was odd by 1 to200fps etc . I dont trust it with rs powders 

Quarter MOA when load testing in the the tunnel at 100yards. I measured using calipers.

Thought I'd share me 900yards group for a more real world group. As the fella wanted to know how the smks fair with the .300NM. in any case the first shot to the left was cold bore. The second one I thought I'd bring it down a tad. By the third I just left it to do it's things and concentrated on me sight picture and body positioning.

2 hours ago, sandyb said:

How did you get on with the 220 SMK’s. Putting in my order for a 300 NM at the end of the month.. Currently buying all the necessary reloading equipment for it.. brass and bullets included. Everything but the powder as this will be the one think that I won’t buy in bulk, trying first N170 or N165 as I already have a tub of this..

What die sets are you all using? I don’t have a neck turner..

.300NM is a great round once you tune it. The 220 SMK with 83.4 grain rs76 give me 3120fps and quarter moa. Id get rs powders. Availability seems to be better. Rs76 or 80. 

2 hours ago, sandyb said:

How did you get on with the 220 SMK’s. Putting in my order for a 300 NM at the end of the month.. Currently buying all the necessary reloading equipment for it.. brass and bullets included. Everything but the powder as this will be the one think that I won’t buy in bulk, trying first N170 or N165 as I already have a tub of this..

What die sets are you all using? I don’t have a neck turner..

.300NM is a great round once you tune it. The 220 SMK with 83.4 grain rs76 give me 3120fps and quarter moa. Id get rs powders. Availability seems to be better. Rs76 or 80. The group to the right is a 6 shot group at 900yards. 

Excellent bit of kit. This is brand new and boxed. Retail for £250 

After £126 posted 

https://spares.bagnallandkirkwood.co.uk/product/mdt-buttstock-adaptors/

SOLD

Please see pics for sizes. 2x green boxes also for £4 each with a bushing purchase. 266 bushing sold already 

Ss bushing 18 posted 

Ti Ni 23 posted 

.338 seater. Works perfectly, aesthetics not great so bargain at £33 posted 

Maybe someones got the time to make it sparkle. I have oiled it.  More rust stains than anything 

Sold pending payment to the gentleman above. Thanks 

Got a couple of hundred, last of a 500count box. 

After £50 per hundred posted. Thanks 

55 minutes ago, fudge1187 said:

Or you could buy a brand new from a reputable dealer for £30 or £37 more.....

https://www.sportingservices.co.uk/products/accu-shot-atlas-bipod-v8-bt10

Or

https://www.livens.co.uk/product/atlas-bipod-bt10-v8/

😉

The one for sale has the QD picatiny mount. 

The ones in your link don't. Hence the price difference. Better to leave people sales threads alone unless there is justifiable reasons, such as fraud etc. 

Bump for a very nice piece of kit

This is the most recent version I believe it came out last year. Feels a lot more robust than the old ones and also more user friendly with the leg length adjust ment being at the top. 230mm legs. £230 posted 

Just wondering if anyone has one of these and what the titan is like in terms of function..thanks. got 2x MDT which is the best brake I have ever used. But like the look of the titan too. Want to try it on the .300NM

Thanks 

Both sold a while a go. Wish I hadn't sold the scope. 🙂

Bump. Perfect for making a nice compact set up

1 hour ago, Yetidude69 said:

That model is only just over £1800 new, so priced right for a quick sale I'd say.

Fair enough. Not wanting to cast aspersions on the OPs character. Can you pm me a link to where they are that price please.

Thanks