Nocrimp
-
Posts
128 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by Nocrimp
-
-
-
For Sale: My unused / unmounted Schmidt & Bender 12-50x56 PMII 2
Second Focal Plane P4F Reticle with 1/8 MOA clicks for Windage & Elevation.
Bought from Optics Warehouse UK for a rifle build that never happened.
Comes boxed with instructions and factory supplied Butler Creek Caps fitted.
New Price is £2860 and this scope is £1800 inc insured delivery.
No offers please, I will wait for someone who wants to buy a PM2 and who wants to save over £1000!
Also listed for sale elsewhere.
-
Sold to me thanks
-
All Sold Now... Many thanks
-
Yes, Large Rifle Primer brass.
-
-
I'm looking for a nice Beretta DT10 Adjustable Stock Sporter - Multichoke 32 inch.
Many thanks
-
-
-
Parts sub £200.. probably £190
Only addition now required is a small clear reservoir tank from a PC cooling system which will allow for water expansion and will let me check the water system is full.
ZVS board was from Ebay (from China) as were some of the other components.
I bought a used MeanWell 27V 750W Switch mode power supply for a bargain £45, but other voltages would work but a decent power supply could easily cost double, as this is the most expensive part.
Could also add a trap door mechanism to drop annealed cases into a bucket underneath to speed up the process.
Lots of vids on Youtube of prettier systems.
-
The video shows a .308 case (over) heated for 7.8 Secs to show speed of heat transfer... this case is ruined.
The actual annealing time for a .308 case is 4.2 Secs.
This timing gives a very nice anneal line just under the shoulder and I can see the dullest dim glow, which is only visible in a very dark room.
-
So.... Lock down boredom got the better of me!
Whilst wasting time on Youtube looking at shooting stuff, I found some intereresting home made Induction Annealing systems.
I did some more research and cobbled a system together (see video).
1000W ZVS Induction Heater board
Home wound, water cooled induction coil using 1/8 inch copper tube
Power supply, Timer module, Solid State Relay, Water Pump and Radiator made for cooling PC's.
It works really well..... the video shows a .308 case heated for 7.8 Secs to show speed of heat transfer.
Actual annealing time for a .308 is 4.2 Secs.
The advantage is that the timer is accurate and so annealing is very consistent... and no gas or flames!
With these boards, the power supply must be beefy to kick start the Induction board into resonance.
-
For sale, SHIELD SIS - CD Sight.
Cased and never used or mounted on a rifle.
A bargain at £250 inc special delivery
-
Two mags please £100
-
I use 50x sometimes and 25x at other times.
I like the option to option to find best image magnification level to balance mist, mirage and light levels.
A 50x scope can be always be used at lower magnification when you prefer.
Not many peiople buy cars that have a top speed of only 70mph.
-
IMHO, definitely a March or a PM2 but why not the 50x or 60x models?
-
Price Drop... can be collected from my local RFD for ... £595
Listed there for: £795 See: Remington 700 Police on this page: https://www.emmettandstone.co.uk/gun-room/used-firearms/used-rifles.html
-
-
Tried to send you a msg but your mailbox isn't working?
If mailbox isnlt fixed, pls send me a msg with your email address.
-
Remington 700P PSS Police model with Farrel one piece 30MOA Rail and Stainless VAIS pepperpot muzzle brake.
Has 26 inch barrel with 1 in 12 twist.
Note the stock is not the original but a standard Remington SPS type.
Will also include a bipod if I can find it.
Priced to sell at £695 NOW £595! Located in Marlow.
Screwcut, proof, Farrel and VAIS Brake cost over £400.
Dealer transfer possible at cost.
Also listed elsewhere.
-
-
Bipod Spigot sold to me... many thanks
-
-
Yes please as per email.
SOLD: Save £1000: Schmidt & Bender 12-50x56 PMII-2 with P4F Reticle 1/8 MOA Clicks
in For Sale (Free Adverts for Private Secondhand Items only)
Posted
Scope is now sold.