Nocrimp

Scope is now sold.

Thanks... mailbox now emptied.

For Sale: My unused / unmounted Schmidt & Bender 12-50x56 PMII 2 Second Focal Plane P4F Reticle with 1/8 MOA clicks for Windage & Elevation. Bought from Optics Warehouse UK for a rifle build that never happened. Comes boxed with instructions and factory supplied Butler Creek Caps fitted. New Price is £2860 and this scope is £1800 inc insured delivery. No offers please, I will wait for someone who wants to buy a PM2 and who wants to save over £1000! Also listed for sale elsewhere.

Sold to me thanks

All Sold Now... Many thanks

Yes, Large Rifle Primer brass.

Once Fired Lapua 308 Cases for sale. Approx 1500 available... £30 per hundred including postage Also advertised elsewhere.

I'm looking for a nice Beretta DT10 Adjustable Stock Sporter - Multichoke 32 inch. Many thanks

Now Sold.

Save £600 on the UK's best price and buy this for £1900. Nightforce Competition 15-55x52 Zerostop FCR-1 Reticule in mint condition.

Parts sub £200.. probably £190 Only addition now required is a small clear reservoir tank from a PC cooling system which will allow for water expansion and will let me check the water system is full. ZVS board was from Ebay (from China) as were some of the other components. I bought a used MeanWell 27V 750W Switch mode power supply for a bargain £45, but other voltages would work but a decent power supply could easily cost double, as this is the most expensive part. Could also add a trap door mechanism to drop annealed cases into a bucket underneath to speed up the process. Lots of vids on Youtube of prettier systems.

The video shows a .308 case (over) heated for 7.8 Secs to show speed of heat transfer... this case is ruined. The actual annealing time for a .308 case is 4.2 Secs. This timing gives a very nice anneal line just under the shoulder and I can see the dullest dim glow, which is only visible in a very dark room.

So.... Lock down boredom got the better of me! Whilst wasting time on Youtube looking at shooting stuff, I found some intereresting home made Induction Annealing systems. I did some more research and cobbled a system together (see video). 1000W ZVS Induction Heater board Home wound, water cooled induction coil using 1/8 inch copper tube Power supply, Timer module, Solid State Relay, Water Pump and Radiator made for cooling PC's. It works really well..... the video shows a .308 case heated for 7.8 Secs to show speed of heat transfer. Actual annealing time for a .308 is 4.2 Secs. The advantage is that the timer is accurate and so annealing is very consistent... and no gas or flames! With these boards, the power supply must be beefy to kick start the Induction board into resonance. PXL_20210213_190519307.mp4

For sale, SHIELD SIS - CD Sight. Cased and never used or mounted on a rifle. A bargain at £250 inc special delivery

Two mags please £100