-
Posts
201 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by dully1963
-
-
please delete
-
Hi
where would I get prices for a re-barrel on a RPA 6mmBrx with a 1 in 7 or 1 in 8 barrel if any of the gunsmiths out there would like to drop me a pm I would be grateful
thanks
-
hi any chance of a picture
thanks
-
no sorry , I think someone is coming tomorrow to pick them up
-
-
nearly new only loaded a couple of hundred rounds
-
-
-
Anyone know where I can get a Frankford Arsenal Platinum Series Perfect Seat Hand Primer that is in stock
Cheers
-
open to sensible offers
-
As above nice compact firedot leupold 2-7x32 great little scope with 30mm tube and the leupold lifetime warrantee so no worry's has got a few slight marks from been fitted but in good condition
It was used as a woodland scope and now surplus to requirement
£400
-
As said before it's probably a 1/2" UNEF thread a picture of the thread might help people
-
23 hours ago, terryh said:
............ but if I was going to drop a new barrel onto and existing rifle i'd go Norma 6mm Dasher
In my experience I would go for the 6mmbr or if you need it with a bit more legs the BRX just saying love my BRX lol
-
On 8/1/2019 at 7:55 PM, Woodlander said:
Will Tikka,or indeed any other manufacturer of fine rifles,bring out a factory chambered 6mmbr,which has to be one of the finest chamberings ever? I would sell all my other rifles to get a TikTac in 6br. I’m still waiting for a shot out .308 or 6.5cm to come up for sale, but I don’t expect that will ever happen.
I can’t be the only one wanting this.
What would be the next best thing, at a reasonable price?
Rpa do a 6mm br as standard
-
just a one for anyone shooting small calibres check out http://www.smallcaliberclub.com/index.php if you after reloading data or help with anything small bore
hope this helps a few people out
ATB dully
-
If it's ripping the necks of then I would think your dies are not setup correctly as no die would be that excessive if it's been lubed just my thoughts ,strip it all down give it a good clean then go n you tube and set it all up again.
also what make of dies are they
-
Just to add my thoughts the new tub of powder is hotter than your last tub , if you have any of the old tub left try a couple of rounds with that powder just to check. plus I would think a creedmoor would be better on bench rest primers
-
As above a harkila fenja roe sack (not the thin light weight ) this is the heavy cordura one with liner , in green but the camera seems to change the colour .
only ever used to carry sandwiches and jumpers as I only ever use the liner . no need of it on the land I shoot on as its easy access
looking for £65 buyer collects not really keen on posting because of the weight.
Seaham area Co Durham. -
18 hours ago, gunner said:
Tidy group , pretty fast compared to my 20 practical / same bullet stiff load at 3652 fps 25" barrel , what twist length is your tube ?
24" barrel and the twist if my memory serves me is a 1 in 10.5 or might be a 1 in 11.5 , I would have to check
-
48 minutes ago, trucraft said:
What are the other 2 just for comparison?
308 on the left and a 6mm Brx in the middle
-
16 hours ago, trucraft said:
Nice group, is that a representative size group for that load?
Bet that's a sweet little varmint caliber. What bullet are you using at what speed?
Have you got a photo of a loaded.round?
Hi I'm running these in the lower velocity node at about 3600 fps but there is a higher node but this does the job for me so why put the pressures up , the bullet is a 39 grn sierra blitzking , I'll try and get a pic on tomorrow of the loaded round.
forgot to say they are the ones on the right .
-
3 hours ago, Bob57 said:
Nice one, smashing when it all comes together 😃.what bullets were they ?
39 grn sierra blitzkings
-
Looks like my load development is getting there 4 shots over the moon
-
Brx all the way no hassel and will mag feed
SOLD
in Varminting
Posted · Edited by dully1963
sold
not available