atlanticity Posted April 24, 2018 Report Share Posted April 24, 2018 Hello advice please as title suggests my seating stem is flaring and catching inside the seating die causing a thunk and bullet seating depth variations.Im already on my second seating stem any advice regards Jonathan Link to comment Share on other sites More sharing options...
snakeman Posted April 24, 2018 Report Share Posted April 24, 2018 Jonathan Unscrew the die and reseat the spring onto the stem as perfectly centered as you can. (if it doesn't work first time, repeat the process... and again as necessary) No need to be worried about things 'flying away' as you unscrew it. Then test by slipping a bullet through the stem. If there is no obstruction to the bullet falling through, all is good It is a simple mechanism and the more the die is used ('beds-in') and 'finds it's own position', it will seat perfectly and the 'thunk' of the spring-coil will be gone ATB Link to comment Share on other sites More sharing options...
atlanticity Posted April 24, 2018 Author Report Share Posted April 24, 2018 Thanks for that I will give that a go,jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.