Raifuru Posted March 14, 2013 Report Share Posted March 14, 2013 I had this built in 2012 by Neil McKillop. The donor was a 30-06 Stainless Tikka T3. Barrel is a 26" Straight Taper 1-8 The Stock is a GRS Long Range Laminate with the rear mono pod. 1/2" UNF thread with protector. Genuinly fired less than 100 rounds. Comes with Wilson seater and bushing die. I also have a couple of hundred Berger 123s, Lapua 123s and Sierra 123s 5 shot 308 Magazine. Pictures will be added as soon as I can. Need the money to fund my next project. All in excellent condition. £1300. Gun is advertised elsewhere. Link to comment Share on other sites More sharing options...
Raifuru Posted March 16, 2013 Author Report Share Posted March 16, 2013 Pictures added. Link to comment Share on other sites More sharing options...
Raifuru Posted March 16, 2013 Author Report Share Posted March 16, 2013 Due to requests, I have added some pictures of the groups I have managed at the range. All are 3 shot grps with the exception of the single 4 shot group that included a fouling shot of the same load. I have to say, I have had difficulty in positioning the stock from the bench but have worked out (with some help) that my bipod was too high, so I purchased a 6-9" one. I have not shot it yet in this config, but off the kitchen table, it seems to be far better. Please do take into account this was load development and i have only shot 53 rounds through it so I was far from complete. Not tried mag primers or RL 15 yet.. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.