army-medic

Not for a tikka, but I think it’s still relevant.

6.5 creedmoor:

Lapua Brass, Lapua 139gr scenar with 42.8gr RS62. Shot out to 1200y recently to good effect.

On 4/19/2021 at 5:26 PM, ColinBR said:

Can anyone give me an idea on a start load for 6.5mm creedmoor using RS62 powder and a 120gr bullet please.

The quickload we have here doesn't have the creedmoor on it.

Thanks in advance

You can download the RS info for quickload here by the way: 

https://www.reload-swiss.com/en/reload_swiss/service_2/quick_load/index.php

I don’t wish to engage with unnecessarily hostile responses. 

If it wasn’t abundantly clear, I am asking how to replicate a specific brand of match ammo. Nothing else.

Most people know how to get some reloading data, whereas I am asking something specific. 
 

If you cannot assist, I politely ask that you don’t respond. I hope that there are more helpful people on the forum.

17 minutes ago, brown dog said:

? 🤔

To me or Popsbengo?

I would be very surprised if it was not a Viht powder.

I’d like to know which powder it is so I can try to make my own and reduce the cost of shooting .338.

Out of curiosity; why else would you think I’d like to know? Seems quite an odd question.

If you decide to use a 139gr scenar then 42.8gr RS62 gets me out to 1200yards.

Sorry if the title suggested, I had this information.

The brass and bullet combo is well known. Any idea on which powder? Nammo owns Lapua and Vihtavouri so it must be a Viht powder.

Thanks

SOLD

Bergara HMR stock from B14r. Never used, taken off new rifle (as I put it in an AICS).

Right handed and comes with bottom metal

excellent condition. Stock RRP £410.

PRICE £300 posted

Full description below:


The Bergara B14 HMR Grey/Black for Remington Footprint SA is a synthetic stock that’s suitable for the Bergara B14 and short action rifles with a Remington Footprint.

Thanks to the ‘mini chassis’ that is situated in the inside of the stock, the stock creates a mount surface on which is very little unused space. This ensures the rifle can be mounted perfectly, without any deviations. This also ensures that the whole stays put during shooting.

The LOP (length of pull) is adjustable from 33.02 cm (13 inch) to 36.83 (14.5 inch) by using the removable pads at the rear side of the stock. On top of this, the cheek piece is also adjustable in height. This combination of adjustability ensures that you can achieve your desired ergonomics.

There are flush cups on the front and on the rear side of the Bergara B14 HMR Grey/Black for Remington Footprint SA stock. These can be used to easily mount sling mounts on the rifle.

The stock is compatible with AICS magazines.

Price £300 posted