Tikktac

Worth mentioning that this is 1/8 MOA clicks scope. You will not find another scope with 1/8 MOA clicks for this money.

I have one of these. Cracking bit of kit. 

This photo shows better how it works. This is the older fixed version but the principal is the same.

I missed the price of the post initially but in the first post now.

£50 posted

I have a couple of these for sale.

I have designed these to mount the Magnetospeed off the barrel.

This fits on the Picatinny rail and it will fit under the Tier One Evolution bipod as in the picture.

You could mount it on the side rail but would not recommend it if you have a muzzle break.

You could put the small Picatinny rail on your Arca rail.

I have fired hundreds of rounds with mine on and never missed a beat. A few of my mates have tested on different rifles as well.

The mounted picture is on Tikka Tac A1.

I have these fitted to the sloping forend of a hunting rifle and adjust the cant of the head to still fit as it should on a hunting rifle.

The reach can also be adjusted on the scope ring end.

I am hardly making anything on these since I don't do my own 3D printing.

If it does not work for just send it back to me for full refund.

£50 posted each.

Never had an issue with Lapua brass but did have an issue with neck sizing die that was leaving the necks corrugated. The seller nor I have seen anything like that. The seller did replace it with a die from a different manufacturer. I only use full length sizing since then. I use RCBS competition sizing and seating die.

One piece Vortex cantilever mount, 30mm tube but it comes with adapters to fit 25mm scope, 2" offset. Mint condition.

Bear in mind all Vortex stuff comes with a lifetime warranty.

£80 posted.

Height-adjustable V7 available

bump

Reduced

LE Wilson 308 bushing full-length sizing die with two bushings. .335 in stainless steel and .332 in titanium nitride.
The kit will cost new around £170.

£90 posted RMSD

Do both scopes have the same reticle?

I have EGW Picatinny rails for Marlin 1894. These are not sold in UK and I believe are best looking rails for the Marlin. It also allows you to use iron sites when the scope is not on it.
Brand new in original packaging - £50 posted
The postage from the US will most likely cost you this much.

I have for sale as new condition Nightforce SHV 5-20x56 non-illuminated, 30mm tube. capped zeroset turrets, parallax down to 25 yards.

I bought this new to use for the 22lr benchrest comps at my club. I only mounted this scope once on my 22lr rifle in Tier One rings and took it off since it does not focus down to 20 yards so I could not do comps with it. Took it off the rifle the next day and it has been my "spare" ever since. Never been used outdoors. I do not have the original box but have a bikini cover that comes with it. I will make sure that it is wrapped well. I have some scope shipping boxes.

This scope new is £1372.99 at Sportsman Gun Centre.

I am looking for £850 shipped RMSD and insured.

And that is what a lot of people do. I tend to stick within the margins of the manufacturers recommendations.

Th reason I am posting this is if you shoot on MOD ranges (as I do) and there is any kind if incident on the range The investigation will inculde your load data and if you are over the top load according to the current values you will be banned from MOD ranges and most likely Bisley since it's the NRA that is driving this following several incidents at Bisley. 

Only noticed by coincidence that Vihtavuori has dropped the top load by a whole grain for the above combination and maybe more.

If you are using the top load for any Vihtavuori rifle powders it may be a good idea to check.

This is important if you shoot on MOD ranges since you would have already signed the NRA statement that you will load to manufacturers data.

Speaks for itself.

Bump

I am selling Zeiss Conquest V4 4-16x44 just over a year old and in as-new condition. Never been used outdoors. New version with 20-yard parallax, illuminated reticle #60, 30mm tube, in the original box and bikini lens cover. Not a single mark anywhere. Was mounted with the Spuhr rings from day one. These are over £1000 new
£700

Sold to mbarber subject to payment.

For sale never used Spuhr SP-3001.

£230 posted

That is over £100 Saving on OW sale price.

So like this mount. I have lots of spare nice rings and mounts but have nothing in 34mm.

I have designed and made these mounts for my own use but have couple to spare.

The picture shows it mounted on Tikka TAC A1 and it goes under the Tier One Evo bipod. The barrel is 22mm.

I assume it will fit most chassis and it is mounted to picatinny rail.

£50 each posted

Bump

Bump

Bump